Direct outgoing dialling

[trond456]

Hi,
I have TSW system connected with Mx-one telephony server over Q-sig...where the TSW is connected to another TSW using DSS protocol (T-interface).
System A :TSW which works like PSTN.
System B: is the TSW which is in between the two systems, which is connected Qsig with the telephony server, and DSS to the other TSW.
System C is the MX-one telephony server.

Extension 100 refers to system B.
Extension 601 refers to the telephony server.

Route 1 is the T-interface route between systems A and B.(dest=3)
Route 2 is the Q-sig route between System B and C.(dest=6)

<ROCAP:ROU=ALL;ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 7130000000000010 4 2110000011 0 30 128 00151515 311010000031 001100
2 7130000000000010 4 3110000011 0 30 128 00151515 311110000031 001100

END

<RODAP:ROU=ALL;ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 SL60 H'00000350 H'05500000 H'00810000 NO
2 SL60 H'00000350 H'75540000 H'00300000 NO

END

<RODDPEST=ALL;EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
2 2 052510000000025000500000000 0 1 0
3 1 000500000000025000000000000 0 1 0
6 2 052510000000025000500000000 0 1 0

END

<NUTRP;NUMBER CONVERSION DATA
ENTRY CNVTYP NUMTYP ROU TARDST PRE TRC NEWTYP CONT BCAP HLC
100 1 10 1 5652100 3 0
601 1 10 1 5652112 3 0
END




The Telepony server users (extension 601) make the outgoing calls to system A(PSTN) through the TSW system B...

I want when I make a call from system C (TSE) to system A(PSTN) through System B... I want the number (601) to be translated to 5652112. I need all translation to be in System B...

for this I configured IN SYSTEM B
NUTRI:ENTRY=601,TRC=3,PRE=5652112,CNVTYP=1,NUMTYP=10,ROU=1;
But this doesn't work .. always I got 601 in system A phones displays...
if you note I considered 601 as internal number for sytem B, since they are connected over Q-sig.is this right?

I know that I could play with it through system C using RONDI and NUTRI...but is it possible to do all the translation through system B??
How to do that??
Your advice is highly appreciated.

 

[whosrdaddy]

since this is a transit call case, cnvtyp 1 will not work. you must use cnvtyp 2. and you must enable the enhanced sent A-number conversion (RODDI ADC D24=1) on the outgoing dest to system A.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[trond456]

Hello Daddy,
I tried that in the transit switch but the same!!! I always got 601 when I receive the call at system A (pstn)..

Again my parameters:
<RODDPEST=ALL;EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
2 2 000500000000025000000001000 0 1 0
3 1 000500000000025000000001000 0 1 0
6 2 000500000000025000000001000 0 1 0

END

<NUTRP;NUMBER CONVERSION DATA
ENTRY CNVTYP NUMTYP ROU TARDST PRE TRC NEWTYP CONT BCAP HLC
100 1 10 1 5652100 3 0
601 2 0 1 5652112 3 0
END


Help is needed....
If you have an example please post your parameters

 

[whosrdaddy]

please show :

RODDI system C
ROCAP system B

also : ditch the rou parameter in the 601 entry.

please post you printouts with monotags for better reading:

[ignore][tt]your printouts[/tt][/ignore]

tt example

[tt]
<rocap:rou=all;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
31 512000000000001 5 2110000000 0 30 128 03151515 311110000031 111111
74 712000001000001 5 2101000001 0 30 128 03151515 311110000031 111110
75 002000000000001 4 3101130000 0 30 128 03151515 200000000000 001100
76 712000001000001 5 2101000001 0 30 128 03151515 311110000031 111110
78 712000001000001 5 2101000001 0 30 128 03151515 311110000031 111110
79 712000001000001 5 2101000001 0 30 128 03151515 311110000031 111110
[/tt]

/Daddy


-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[trond456]

system B (TSWSP04):
Route 1 is the PRI T-interface route to system A.
Route 2 is the Qsig route to the telephony server (System C).

[tt]<ROCAP:ROU=ALL;ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 7130000000000010 4 2110000011 0 30 128 00151515 311010000031 001100
2 7130000000000010 4 3110000011 0 30 128 00151515 311110000031 001100

END

<RODAP:ROU=ALL;ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 SL60 H'00000350 H'05500000 H'00810000 NO
2 SL60 H'00000350 H'75540000 H'00300000 NO

END

<RODDPEST=ALL;EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
2 2 000500000000025000000001000 0 1 0
3 1 000500000000025000000001000 0 1 0
6 2 000500000000025000000001000 0 1 0

END

<NUTRP;NUMBER CONVERSION DATA
ENTRY CNVTYP NUMTYP ROU TARDST PRE TRC NEWTYP CONT BCAP HLC
100 1 10 1 5652100 3 0
601 2 0 1 5652112 3 0

END
[/tt]


System C (TSE 3.1) (extension 601)
[tt]<ROCAP:ROU=ALL;ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 7130000000000010 4 2110000011 0 30 128 00151515 311010000031 001100


<RODAP:ROU=ALL;ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 SL60 H'00000350 H'05520000 H'00400000 NO


<RODDPEST=ALL;EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
1 1 000500000000025000000001000 0 1 0
3 1 000500000000025000000001000 0 1 0


END


[/tt]


System A acts as a PSTN (TSW) (extension 301).
When I call from system C (Ext.601) to system A (PSTN) (ext. 301), the call goes though system B (transit), I need system B to send the CLIP of the entry 601 as 5652112 to system C , as I programmed in system B...
Your advice is highly appreciated

 

[whosrdaddy]

try this (SYSTEM B)

NUTRE:ENTRY=601;
NUTRI:ENTRY=601,CNVTYP=2,NUMTYP=2,TARDEST=3,TRC=R,PRE=5652112;

if it still does not work

make a call trace:

STUNI:UNIT=SLP60,LIM=1,MSKSIG=02&03&A1,STORE=YES; /*assuming trunks are in LIM1

STTSI:TRI=1;
/* make transit call */
STTSE:TRI=1;
/* open logfile */
STRAP:TRI=1;
/* close logfile */
analyze this file with signal trace interpreter (SAM toolbox). If you don't have SAM toolbox, attach the file in this thread (use step3 attachment). I will interpret it for you.

/Daddy




-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[trond456]

Hi Daddy,
CNVTYP=2 couldn't be used together with TARDST..
CNVTYP must be 1 to be used with TARDST..

Daddy, does the scenario Im trying is acheivable?? do you have some sites with same scenario??

I have done the traces many times before for a transit call ,at the transit switch ofcourse (TSW),...always I got the calling number 601!!! anyway below you find the trace of a transit call:extension 601 (system C) is calling 302 (PSTN-system A)

<STRAP:tri=1;
TRACE IND READ RESULT
TRACE INDIVIDUAL NO 1
TIME LINE(S)
15.50.00.700 00001 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-0-50-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'01 H'08 H'02 H'00 H'75 H'05 H'04 H'03 H'80
010 H'90 H'A3 H'18 H'03 H'A1 H'83 H'81 H'1E H'02 H'81
020 H'83 H'6C H'05 H'01 H'81 H'36 H'30 H'31 H'70 H'02
030 H'81 H'33 H'9C H'31 H'01 H'80 H'9D H'32 H'01 H'81
040 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
15.50.00.760 00002 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-0-50-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'75 H'0D H'18 H'03 H'A9 H'83 H'81
010 H'02 H'05 H'3C H'2C H'02 H'05 H'4B H'B8
15.50.00.880 00003 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-1-10-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'00 H'FB H'05 H'04 H'03 H'80 H'90 H'A3
010 H'18 H'03 H'A9 H'83 H'81 H'1E H'02 H'81 H'83 H'6C
020 H'05 H'01 H'81 H'36 H'30 H'31 H'70 H'02 H'81 H'33
030 H'02 H'05 H'3C H'2C H'02 H'05 H'4B H'B8
15.50.00.980 00004 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-1-10-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'00 H'08 H'02 H'80 H'FB H'0D H'18 H'03 H'A9
010 H'83 H'81 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
15.50.01.080 00005 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-0-50-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'01 H'08 H'02 H'00 H'75 H'7B H'70 H'02 H'81
010 H'30 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
15.50.01.100 00006 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-1-10-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'00 H'FB H'7B H'70 H'02 H'81 H'30 H'02
010 H'05 H'3C H'2C H'02 H'05 H'4B H'B8
15.50.01.580 00007 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-0-50-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'01 H'08 H'02 H'00 H'75 H'7B H'70 H'02 H'81
010 H'32 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
15.50.01.580 00008 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-1-10-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'00 H'FB H'7B H'70 H'02 H'81 H'32 H'02
010 H'05 H'3C H'2C H'02 H'05 H'4B H'B8
15.50.01.640 00009 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-1-10-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'00 H'08 H'02 H'80 H'FB H'02 H'00 H'00 H'00
010 H'00 H'00 H'00 H'00 H'00
15.50.01.660 00010 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-0-50-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'75 H'02 H'02 H'05 H'3C H'2C H'02
010 H'05 H'4B H'B8
15.50.01.760 00011 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-1-10-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'00 H'08 H'02 H'80 H'FB H'01 H'1E H'02 H'81
010 H'88 H'1E H'02 H'81 H'82 H'00 H'00 H'00 H'00 H'00
020 H'00 H'00 H'00
15.50.01.840 00012 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-0-50-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'75 H'07 H'1E H'02 H'81 H'88 H'1E
010 H'02 H'81 H'82 H'02 H'05 H'3C H'2C H'02 H'05 H'4B
020 H'B8
15.50.01.980 00013 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-0-50-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'01 H'08 H'02 H'00 H'75 H'0F H'00 H'00 H'00
010 H'00 H'00 H'00 H'00 H'00
15.50.05.000 00014 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-0-50-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'01 H'08 H'02 H'00 H'75 H'45 H'08 H'02 H'81
010 H'90 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
15.50.05.040 00015 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-1-10-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'00 H'FB H'45 H'08 H'02 H'81 H'90 H'1E
010 H'02 H'81 H'88 H'02 H'05 H'3C H'2C H'02 H'05 H'4B
020 H'B8
15.50.05.040 00016 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-0-50-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'75 H'4D H'08 H'02 H'81 H'90 H'02
010 H'05 H'3C H'2C H'02 H'05 H'4B H'B8
15.50.05.120 00017 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-0-50-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'01 H'08 H'02 H'00 H'75 H'5A H'00 H'00 H'00
010 H'00 H'00 H'00 H'00 H'00
15.50.05.120 00018 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-1-10-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'00 H'08 H'02 H'80 H'FB H'4D H'08 H'02 H'81
010 H'90 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
15.50.05.160 00019 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-1-10-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'00 H'FB H'5A H'02 H'05 H'3C H'2C H'02
010 H'05 H'4B H'B8
END

 

[whosrdaddy]

ah, my bad.

you need to use CNVTYP 1.

/* system B */
NUTRE:ENTRY=601;
NUTRI:ENTRY=601,CNVTYP=1,NUMTYP=0,TARDEST=3,TRC=R,PRE=5652112;

this will do the trick

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[trond456]

I have already did this and it is the same result.
what do you mean by TRC=R??!!
This is my NUTRP in SYSTEM B
[tt]
<NUTRP;NUMBER CONVERSION DATA
ENTRY CNVTYP NUMTYP ROU TARDST PRE TRC NEWTYP CONT BCAP HLC
601 1 0 3 5652112 3 0
100 1 10 1 5652100 3 0
END
[/tt]

Below you find the trace of a transit call with the translation you recommend.
what do you think...
My system is TSWSP05 and TSE3.1

[tt]


STORAGE STARTED: TRACE INDIVIDUAL NO 1
<STRAP:tri=1;
TRACE IND READ RESULT
TRACE INDIVIDUAL NO 1
TIME LINE(S)
10.17.29.660 00001 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-0-50-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'01 H'08 H'02 H'00 H'7D H'05 H'04 H'03 H'80
010 H'90 H'A3 H'18 H'03 H'A1 H'83 H'81 H'1E H'02 H'81
020 H'83 H'6C H'05 H'01 H'81 H'36 H'30 H'31 H'70 H'02
030 H'81 H'33 H'9C H'31 H'01 H'80 H'9D H'32 H'01 H'81
040 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
10.17.29.740 00002 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-0-50-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'7D H'0D H'18 H'03 H'A9 H'83 H'81
010 H'02 H'05 H'3C H'2C H'02 H'05 H'4B H'B8
10.17.29.860 00003 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-1-10-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'01 H'02 H'05 H'04 H'03 H'80 H'90 H'A3
010 H'18 H'03 H'A9 H'83 H'81 H'1E H'02 H'81 H'83 H'6C
020 H'05 H'01 H'81 H'36 H'30 H'31 H'70 H'02 H'81 H'33
030 H'02 H'05 H'3C H'2C H'02 H'05 H'4B H'B8
10.17.29.940 00004 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-1-10-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'00 H'08 H'02 H'81 H'02 H'0D H'18 H'03 H'A9
010 H'83 H'81 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
10.17.29.960 00005 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-0-50-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'01 H'08 H'02 H'00 H'7D H'7B H'70 H'02 H'81
010 H'30 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
10.17.30.000 00006 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-1-10-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'01 H'02 H'7B H'70 H'02 H'81 H'30 H'02
010 H'05 H'3C H'2C H'02 H'05 H'4B H'B8
10.17.30.260 00007 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-0-50-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'01 H'08 H'02 H'00 H'7D H'7B H'70 H'02 H'81
010 H'32 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
10.17.30.260 00008 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-1-10-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'01 H'02 H'7B H'70 H'02 H'81 H'32 H'02
010 H'05 H'3C H'2C H'02 H'05 H'4B H'B8
10.17.30.320 00009 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-1-10-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'00 H'08 H'02 H'81 H'02 H'02 H'00 H'00 H'00
010 H'00 H'00 H'00 H'00 H'00
10.17.30.340 00010 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-0-50-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'7D H'02 H'02 H'05 H'3C H'2C H'02
010 H'05 H'4B H'B8
10.17.30.440 00011 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-1-10-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'00 H'08 H'02 H'81 H'02 H'01 H'1E H'02 H'81
010 H'88 H'1E H'02 H'81 H'82 H'00 H'00 H'00 H'00 H'00
020 H'00 H'00 H'00
10.17.30.520 00012 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-0-50-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'7D H'07 H'1E H'02 H'81 H'88 H'1E
010 H'02 H'81 H'82 H'02 H'05 H'3C H'2C H'02 H'05 H'4B
020 H'B8
10.17.30.680 00013 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-0-50-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'01 H'08 H'02 H'00 H'7D H'0F H'00 H'00 H'00
010 H'00 H'00 H'00 H'00 H'00
10.17.33.860 00014 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-0-50-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'01 H'08 H'02 H'00 H'7D H'45 H'08 H'02 H'81
010 H'90 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
10.17.33.900 00015 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-1-10-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'01 H'02 H'45 H'08 H'02 H'81 H'90 H'1E
010 H'02 H'81 H'88 H'02 H'05 H'3C H'2C H'02 H'05 H'4B
020 H'B8
10.17.33.900 00016 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-0-50-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'80 H'7D H'4D H'08 H'02 H'81 H'90 H'02
010 H'05 H'3C H'2C H'02 H'05 H'4B H'B8
10.17.33.960 00017 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-0-50-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'01 H'08 H'02 H'00 H'7D H'5A H'00 H'00 H'00
010 H'00 H'00 H'00 H'00 H'00
10.17.33.960 00018 HWSW SIGNAL DLIDATALONG (H'0002)
FROM EQU NO 1-1-10-00
TO SLP60 (H'037B) EXE A IN LIM 001
WITH 0 1 2 3 4 5 6 7 8 9
000 H'01 H'00 H'08 H'02 H'81 H'02 H'4D H'08 H'02 H'81
010 H'90 H'00 H'00 H'00 H'00 H'00 H'00 H'00 H'00
10.17.33.980 00019 SWHW SIGNAL DLRDATALONG (H'00A1)
FROM SLP60 (H'037B) EXE A IN LIM 001
TO EQU NO 1-1-10-00
WITH 0 1 2 3 4 5 6 7 8 9
000 H'08 H'02 H'01 H'02 H'5A H'02 H'05 H'3C H'2C H'02
010 H'05 H'4B H'B8
END

[/tt]

 

[whosrdaddy]

I meant TRC=3 (type)

I tested your config in lab and my NUTRP works on my lab systems.
One odd thing is that your BCAP parameter = 001100 on your routes, this should be 111100 to allow 64k calls (that's what I'm seeing in the traces).
change them and see what you get.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[trond456]

changed BCAP but the same!!!
Could you please post your parameters (ROCAP,RODAP,RODDP,nutrp) at the three systems also the extension category...
What releases do you have??

Did you do all translations at ystem B as required??

 

[trond456]

Daddy,
Could you please post your parameters here??