Digital Station Firmware Report (CM6)

[Jenuine]

I found a post once that gave me a command to list the station and its' firmware version.... but now I can't find it to save my life.

 

[AvayaTier3]

list registered-ip-stations                                            Page   1

                            REGISTERED IP STATIONS

Station  Set     Product    Prod   Station         Net Orig    Gatekeeper    TCP
Ext      Type    ID         Rel    IP Address      Rgn Port    IP Address    Skt
2111     4621    IP_Phone   2.7000 192.168.15.76    2           192.168.21.10   y
2112     4621    IP_Phone   2.7000 192.168.15.60    2           192.168.21.10   y
2113     4621    IP_Phone   2.7000 192.168.15.66    2           192.168.21.10   y

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[AvayaTier3]

Command: status station xxxx

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[Jenuine]

Thanks for the prompt reply!
I'm actually looking for a command that will display all digital stations' firmware.
I was just paging through it two weeks ago to make sure all my stations were above
R24 and I am kicking myself for losing the note I made!

 

[AvayaTier3]

Are you referring to circuit-pack FW for DCP phones or media-module FW for DCP phones?

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[Jenuine]

I'm referring to the FW on the DCP phones. We have all 14XX phones and I have paged through a list of stations #s and their current FW version and hope to find the ASA command to do it again.

 

[lopes1211]

Not meaning to take the thread on a tangent.....but what would that give you? Is it just to make sure they are all running the same FW or are there specific significant issues experianced between the differnt DCP firmware revs?

-CL

 

[Jenuine]

Hi Lopes,
First, the installers never finished updating the stations from their original R4 fw, which had a tiny speaker volume range. Then, the call log won't let the user use the 'call' softkey to dial the #... even after a 'custom' fw created by the installing company and various other fw revisions(Tier3 is supposed to be working on another fw). I have 650+ phones that I need to survey and keep track of since I'm sure we'll have another fw to load soon, that an my boss demands consistency.

The report or listup that I ran had other info on it, but I can't recall what since I was just interested in the firmware, but I know it didn't iclude names, just station #, fw version, and some other stuff that was probably handy.

 

[dignoffo]

Jenuine,

The command you are looking for is:

list-stn

 

[dignoffo]

Jenuine,

Correction: command is list stn-firmware

 

[AvayaTier3]

dignoffo,

Where do you find such a command?



A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[Jenuine]

Dignoffo you are my hero!
Thanks to all of you for your time.
J

 

[AvayaTier3]

Thanks Dignoffo

It's new for cm6


A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]