Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

diffrences between a csv file in 2003 and 2007

Status
Not open for further replies.
jackmaster

jackmaster

Technical User
Dec 15, 2011
15
GB
i am using a csv file to create a tool catalogue in Catia V5 and it worked perfectly using a csv file from office 2003 now using 2007 it doesnt work and the file size is almost 4 times the size of the 2003 csv file, when i open the csv file using wordpad the 2007 version has multiple commas after each line and these are not there in the 2003 version.

Cheers Jackmaster
 
Sort by date Sort by votes

So you pretty much have data like this:

[tt]
A B [blue]C D[/blue] E F
123 ABC
987 XYZ
[blue]765 TYU
987 YTR[/blue]
434 XXX
666 ZZZ[/TT]

but for some reason you want to save the entire file (or just the [blue]blue[/blue] data) as csv without empty spaces (commas) for empty cells?

Have fun.

---- Andy
 
Upvote 0 Downvote


Hmmmm???

Was there a macro that you, or someone else, ran to generate this .csv file? That is the only way that I know, that the 2003 results from your workbook could occur.

Skip,
[sub]
[glasses]Just traded in my old subtlety...
for a NUANCE![tongue][/sub]
 
Upvote 0 Downvote
Sorry to disappoint you Skip but I posted the first few lines of data taken from both the 2003 and 2007 csv files, I did this to hi-light the difference if you want me to post ALL of the data then I will and then you will see all of the commas, If you have both versions then i suggest you create a version using both and you WILL see the difference.

The csv files WAS created using file save as and NOTHING else.
 
Upvote 0 Downvote



What does the data look like below the portion that you pasted here?

Do you have some output that goes into column other than only A & B?

Please copy 'n' paste entire rows

Skip,
[sub]
[glasses]Just traded in my old subtlety...
for a NUANCE![tongue][/sub]
 
Upvote 0 Downvote
i know this is over kill but these are the outputs i get from bother versions.

************2003************

CHAPTER,NC_RESOURCES
Keywords,Name
Types,String
NC_TOOLS,NC_TOOLS
NC_INSERTS,NC_INSERTS
NC_TOOL_ASSEMBLIES,NC_TOOL_ASSEMBLIES
NC_CORRECTORS,NC_CORRECTORS
END,

CHAPTER,NC_TOOLS
Keywords,Name
Types,String
MfgDrillTool,MfgDrillTool
MfgCenterDrillTool,MfgCenterDrillTool
MfgBoringBarTool,MfgBoringBarTool
MfgMultiDiamDrillTool,MfgMultiDiamDrillTool
MfgBoringAndChamferingTool,MfgBoringAndChamferingTool
MfgCountersinkTool,MfgCountersinkTool
MfgReamerTool,MfgReamerTool
MfgTapTool,MfgTapTool
MfgSpotDrillTool,MfgSpotDrillTool
MfgTwoSidesChamferingTool,MfgTwoSidesChamferingTool
MfgThreadMillTool,MfgThreadMillTool
MfgCounterboreMillTool,MfgCounterboreMillTool
MfgConicalMillTool,MfgConicalMillTool
MfgEndMillTool,MfgEndMillTool
MfgFaceMillTool,MfgFaceMillTool
MfgTSlotterTool,MfgTSlotterTool
MfgExternalTool,MfgExternalTool
MfgInternalTool,MfgInternalTool
MfgGrooveExternalTool,MfgGrooveExternalTool
MfgGrooveInternalTool,MfgGrooveInternalTool
MfgGrooveFrontalTool,MfgGrooveFrontalTool
MfgThreadExternalTool,MfgThreadExternalTool
MfgThreadInternalTool,MfgThreadInternalTool
END,

CHAPTER,NC_INSERTS
Keywords,Name
Types,String
MfgRoundInsert,MfgRoundInsert
MfgSquareInsert,MfgSquareInsert
MfgDiamondInsert,MfgDiamondInsert
MfgTriangularInsert,MfgTriangularInsert
MfgTrigonInsert,MfgTrigonInsert
MfgThreadInsert,MfgThreadInsert
MfgGrooveInsert,MfgGrooveInsert
END,

CHAPTER,NC_TOOL_ASSEMBLIES,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,Name,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Types,String,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgMillAndDrillToolAssembly,MfgMillAndDrillToolAssembly,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgMillAndDrillToolAssembly,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_TOOL_NAME,MFG_TOOL_NUMBER,MFG_COMMENT,MFG_NAME,MFG_ORIENT_ANGLE,MFG_TL_SET_X,MFG_TL_SET_Y,MFG_TL_SET_Z,MFG_TL_SET_LGTH,MFG_DIAMETER_1,MFG_ASS_GAGE_1,MFG_DIAMETER_2,MFG_CONE_DIAMETER_1,MFG_ASS_GAGE_2,MFG_DIAMETER_3,MFG_CONE_DIAMETER_2,MFG_HOLDER_LENGTH_1,MFG_DIAMETER_4,MFG_CONE_DIAMETER_3,MFG_HOLDER_LENGTH_2,MFG_DIAMETER_5,MFG_CONE_DIAMETER_4,MFG_HOLDER_LENGTH_3,MFG_DIAMETER_6,MFG_CONE_DIAMETER_5,MFG_HOLDER_LENGTH_4,MFG_CONE_LENGTH,MFG_TOOL_ASS_POWER,MFG_NB_OF_COMP,MFG_HOLDER_STAGES,
Types,String,String,Integer,String,String,Integer,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,mm,String,Integer,Integer,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly 578,HPA Ecospeed - xyz Cutters,ETS15255-181,578,ECO 4,ETA15578-182,,,,,224,6.2,150,33,35,1,35,42,47,42,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly 576,HPA Ecospeed - xyz Cutters,ETS15122-181,576, SMALL ANGLED HEAD,ETA15578-182,,32.9946,9.4996,9.4996,240,3.2,15,18,20,1,20,0,22,0,0,0,0,0,0,0,0,,,MFG_POWERED,2,2,
Tool Assembly 524,HPA Ecospeed - xyz Cutters,ETS15299-181,524,ECO 1,ETA15524-182,,,,,150,5.994,55,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly 577,HPA Ecospeed - xyz Cutters,ETS15032-181,577,ECO 3,ETA15577-182,,,,,106,16,36,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly 575,HPA Ecospeed - xyz Cutters,ETS15139-181,575,ECO 2,ETA15575-182,,,,,114,9,47,25,27,1,27,32,37,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly 574,HPA Ecospeed - xyz Cutters,ETS15091-181,574,ECO 4,ETA15574-182,,,,,139,20,64,33,35,1,35,42,47,42,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly 562,HPA Ecospeed - xyz Cutters,ETS15027-181,562,ECO 3,ETA15562-182,,,,,124,12,52,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly 573,HPA Ecospeed - xyz Cutters,ETS15214-181,573,ECO 6,ETA15573-182,,,,,159,28.581,59,43,45,1,45,53,57,53,0,16,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly 569,HPA Ecospeed - xyz Cutters,ETS15246-181,569,ECO 2,ETA15569-182,,,,,149,12.7,84,25,27,1,27,32,37,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly 570,HPA Ecospeed - xyz Cutters,ETS15250-181,570,ECO 6,ETA15570-182,,,,,158,33.344,58,43,45,1,45,53,57,53,0,16,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly 566,HPA Ecospeed - xyz Cutters,ETS15313-181,566,ECO 3,ETA15566-182,,,,,170,16,100,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly 565,HPA Ecospeed - xyz Cutters,ETS15312-181,565,ECO 3,ETA15565-182,,,,,138,16,68,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly 564,HPA Ecospeed - xyz Cutters,ETS15311-181,564,ECO 3,ETA15564-182,,,,,170,16,100,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly 563,HPA Ecospeed - xyz Cutters,ETS15310-181,563,ECO 3,ETA15563-182,,,,,138,16,68,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly 302,HPA Ecospeed - xyz Cutters,ETS15309-181,302,ECO 1,ETA15302-182,,,,,170,5.26,75,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
T-Slotter Tool Assembly 991,HPA ECOSPEED,Probe,991,INTEGRAL,ETA15991-182,,,,171.2,246.2,6,75,46,62,8,62,0,171.2,0,0,0,0,0,0,,,,0,MFG_POWERED,2,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly T568,HPA Ecospeed - xyz Cutters,ETS15306-181-A,568,LARGE MILLING HEAD,ETA15568-182,,45.4914,39.497,25.5016,224.5,6.71,25,47,47,21.1,51,51,0,0,0,0,0,0,0,0,0,,,MFG_POWERED,2,2,G:\MANUFACTURING\CATIA V5\NC\Mach\Manufacturing\Tools\NEW_TOOL_DATABASE\UserReps\ETA15568-182.CATPart,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly T549,HPA Ecospeed - xyz Cutters,ETS15213-181,549,ECO 1,ETA15549-182,,,,,174,4.17,79,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly T525,HPA Ecospeed - xyz Cutters,ETS15288-181,525,ECO 1,ETA15525-182,,,,,150,3.251,55,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly T561,HPA Ecospeed - xyz Cutters,ETS15136-181,561,ECO 3,ETA15561-182,,,,,148,12,78,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Tool Assembly T560,HPA Ecospeed - xyz Cutters,ETS15292-181,560,ECO 1,ETA15560-182,,,,,149,4.513,54,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T559,HPA Ecospeed - xyz Cutters,ETS15198-181,559,ECO 3,ETA15559-182,,,,,154,16,84,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T558,HPA Ecospeed - xyz Cutters,ETS15156-181,558,ECO 5,ETA15558-182,,,,,234,25,154,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T557,HPA Ecospeed - xyz Cutters,ETS15132-181,557,ECO 5,ETA15557-182,,,,,184,25,104,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T556,HPA Ecospeed - xyz Cutters,ETS15158-181,556,ECO 3,ETA15556-182,,,,,170,16,100,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T555,HPA Ecospeed - xyz Cutters,ETS15130-181,555,ECO 3,ETA15555-182,,,,,138,16,68,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T554,HPA Ecospeed - xyz Cutters,ETS15261-181,554,ECO 1,ETA15554-182,,,,,149,0.25,54,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T553,HPA Ecospeed - xyz Cutters,ETS15291-181,553, SMALL ANGLED HEAD,ETA15553-182,,29.9974,9.4996,9.4996,50,2.433,12,18,20,1,20,0,22,0,0,0,0,0,0,0,0,,,MFG_POWERED,2,2,
Tool Assembly T552,HPA Ecospeed - xyz Cutters,ETS15290-181,552,ECO 10,ETA15552-182,,,,,215,2.433,35,16,0,110,28.3,34,41,34,40,3,80,0,26,0,0,,,MFG_POWERED,2,5,
Tool Assembly T551,HPA Ecospeed - xyz Cutters,ETS15287-181,551,ECO 2,ETA15551-182,,,,,141,12,76,25,27,1,27,32,37,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T550,HPA Ecospeed - xyz Cutters,ETS15289-181,550,ECO 5,ETA15550-182,,,,,209,25,129,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T548,HPA Ecospeed - xyz Cutters,ETS15131-181,548,ECO 3,ETA15548-182, ,,,,124,12,52,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T571,HPA Ecospeed - xyz Cutters,ETS15317-181,571,ECO30+SF16,ETA15571-182,,,,,147,6.35,51,16,0,26,28.3,34,41,34,40,3,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T546,HPA Ecospeed - xyz Cutters,ETS15195-181,546,ECO 3,ETA15546-182,,,,,112,12,40,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T545,HPA Ecospeed - xyz Cutters,ETS15022-181,545,ECO 5,ETA15545-182,,,,,209,25,129,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T544,HPA Ecospeed - xyz Cutters,ETS15244-181,544,ECO 4,ETA15544-182,,,,,224,20,149,33,35,1,35,42,47,42,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T543,HPA Ecospeed - xyz Cutters,ETS15010-181,543,ECO 4,ETA15543-182,,,,,159,20,84,33,35,1,35,42,47,42,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T542,HPA Ecospeed - xyz Cutters,ETS15129-181,542,ECO 4,ETA15542-182,,,,,199,20,124,33,35,1,35,42,47,42,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T541,HPA Ecospeed - xyz Cutters,ETS15280-181,541,ECO5+SF25,ETA15541-182,,,,,235,12,45,20,25,28.575,25,0,81.425,45,53,53,53,55,1,80,0,,,MFG_POWERED,2,5,
Tool Assembly T540,HPA Ecospeed - xyz Cutters,ETS15283-181,540,ECO 3,ETA15540-182,,,,,138,16,68,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T539,HPA Ecospeed - xyz Cutters,ETS15077-181,539,ECO 1,ETA15539-182,,,,,117,9,22,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T538,HPA Ecospeed - xyz Cutters,ETS15279-181,538,ECO 4,ETA15538-182,,,,,159,20,84,33,35,1,35,42,47,42,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T537,HPA Ecospeed - xyz Cutters,ETS15157-181,537,ECO 5,ETA15537-182,,,,,234,25,154,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T536,HPA Ecospeed - xyz Cutters,ETS15023-181,536,ECO 5,ETA15536-182,,,,,209,25,129,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T535,HPA Ecospeed - xyz Cutters,ETS15011-181,535,ECO 5,ETA15535-182,,,,,184,25,104,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T534,HPA Ecospeed - xyz Cutters,ETS15281-181,534,ECO 5,ETA15534-182,,,,,184,25,104,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T533,HPA Ecospeed - xyz Cutters,ETS15018-181,533,ECO 3,ETA15533-182,,,,,138,16,68,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T532,HPA Ecospeed - xyz Cutters,ETS15268-181,532,ECO 5,ETA15532-182,,,,,134,25,54,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T531,HPA Ecospeed - xyz Cutters,ETS15216-181,531,ECO 10,ETA15531-182,,,,,197,3,17,16,0,110,28.3,34,41,34,40,3,80,0,26,0,0,,,MFG_POWERED,2,5,
Tool Assembly T567,HPA Ecospeed - xyz Cutters,ETS15306-181,567,ECO 1,ETA15567-182,,,,,117,6.35,21,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T529,HPA Ecospeed - xyz Cutters,ETS15155-181,529,ECO 4,ETA15529-182,,,,,199,20,124,33,35,1,35,42,47,42,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T528,HPA Ecospeed - xyz Cutters,ETS15257-181,528,ECO 2,ETA15528-182,,,,,163,11.51,98,25,27,1,27,32,37,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T527,HPA Ecospeed - xyz Cutters,ETS15253-181,527,ECO 1,ETA15527-182,,,,,130,2.29,35,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T526,HPA Ecospeed - xyz Cutters,ETS15247-181,526,ECO 7,ETA15526-182,,,,,150,4.07,45,40,50,5,50,0,74,80,0,26,0,0,0,0,0,,,MFG_POWERED,2,3,
Tool Assembly T523,HPA Ecospeed - xyz Cutters,ETS15222-181,523,ECO 3 (SPECIAL EXT),ETA15523-182,,,,,145,4.412,40,16,0,63,26,28,1,28,34,42,34,0,1,80,0,,,MFG_POWERED,2,5,
Tool Assembly T522,HPA Ecospeed - xyz Cutters,ETS15260-181,522,ECO 2,ETA15522-182,,,,,143,9.525,78,25,27,1,27,32,37,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T521,HPA Ecospeed - xyz Cutters,ETS15254-181,521,ECO 1,ETA15521-182,,,,,140,4.166,45,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T520,HPA Ecospeed - xyz Cutters,ETS15259-181,520,ECO 1,ETA15520-182,,,,,139,4.826,44,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T519,HPA Ecospeed - xyz Cutters,ETS15256-181,519,ECO 1,ETA15519-182,,,,,135,3.175,40,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T518,HPA Ecospeed - xyz Cutters,ETS15255-181,518,ECO 1,ETA15518-182,,,,,135,4,40,22,24,1,24,32,67,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T517,HPA Ecospeed - xyz Cutters,ETS15228-181,517,ECO 2,ETA15517-182,,,,,129,12,64,25,27,1,27,32,37,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T516,HPA Ecospeed - xyz Cutters,ETS15007-181,516,ECO 3,ETA15516-182,,,,,234,16,164,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T515,HPA Ecospeed - xyz Cutters,ETS15101-181,515,ECO 7,ETA15515-182,,,,,190,16,85,40,50,5,50,0,74,80,0,26,0,0,0,0,0,,,MFG_POWERED,2,3,
Tool Assembly T514,HPA Ecospeed - xyz Cutters,ETS15048-181,514,ECO 5,ETA15514-182,,,,,182,26,102,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T512,HPA Ecospeed - xyz Cutters,ETS15278-181,512,ECO 5,ETA15512-182,,,,,167,16,87,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T510,HPA Ecospeed - xyz Cutters,ETS15276-181,510,ECO 3,ETA15510-182,,,,,170,16,100,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T509,HPA Ecospeed - xyz Cutters,ETS15275-181,509,ECO 5,ETA15509-182,,,,,184,25,104,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T508,HPA Ecospeed - xyz Cutters,ETS15274-181,508,ECO 5,ETA15508-182,,,,,229,25,149,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,
Tool Assembly T507,HPA Ecospeed - xyz Cutters,ETS15273-181,507,ECO 2,ETA15507-182,,,,,141,12,76,25,27,1,27,32,37,32,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,
Tool Assembly T506,HPA Ecospeed - xyz Cutters,ETS15272-181,506,ECO 3,ETA15506-182,,,,,170,16,100,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,
Tool Assembly T505,HPA Ecospeed - xyz Cutters,ETS15271-181,505,ECO 3,ETA15505-182,,,,,170,16,100,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,
Tool Assembly T504,HPA Ecospeed - xyz Cutters,ETS15270-181,504,ECO 3,ETA15504-182,,,,,138,16,68,26,28,1,28,34,42,34,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,
Tool Assembly T502,HPA Ecospeed - xyz Cutters,ETS15269-181,502,ECO 5,ETA15502-182,,,,,159,25,79,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,
Tool Assembly T501,HPA Ecospeed - xyz Cutters,ETS15268-181,501,ECO 5,ETA15501-182,,,,,134,25,54,43,45,1,45,53,52,53,0,1,80,0,26,0,0,,,MFG_POWERED,2,4,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgEndMillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_MACH_QUALITY,MFG_MAX_PLNG_ANG,MFG_TL_RAKE_ANG,MFG_COMPOSITION,MFG_TOOTH_MAT,MFG_TOOTH_MATDESC,MFG_TOOTH_DESC,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_LENGTH,MFG_CUT_LENGTH,MFG_CORNER_RAD,MFG_BODY_DIAM,MFG_WEIGHT_SNTX,MFG_COOLNT_SNTX,MFG_MAX_MIL_TIME,MFG_MAX_MIL_LENGTH,MFG_TOOL_NUMBER,MFG_BALL_TYPE,MFG_VC_FINISH,MFG_SZ_FINISH,MFG_AA_FINISH,MFG_AR_FINISH,MFG_VC_ROUGH,MFG_SZ_ROUGH,MFG_AA_ROUGH,MFG_AR_ROUGH,MFG_MAX_FEEDRATE,MFG_SPNDL_SPEED,MFG_FEED_VALUE,,,
Types,String,String,String,Integer,String,String,deg,deg,String,String,String,String,mm,mm,mm,mm,mm,mm,String,String,s,mm,Integer,Boolean ,mm_mn,mm_turn,mm,mm,mm_mn,mm_turn,mm,mm,mm_mn,rpm,m_mn,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
End Mill,HPA Ecospeed - xyz Cutters,0,0,6,0,EITHER,3,0,0,0,,,50,80,50,30,5,45,0,ON,,,0,,785398.1634,0.1,,,785398.1634,0.1,,,3000,5000,3000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15139-181,9mm Dia x 5D x 3.05mm Rad,2,RIGHT_HAND,FINISH,0,10,ONE_PIECE,CARBIDE,,3602,9,49,6,6,3.05,8.5,1,THRU,,,0,,508938.0099,0.1,,,508938.0099,0.1,,,50000,18000,3600,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15091-181,20mm Dia x 3D x 2.5mm Rad,3,RIGHT_HAND,FINISH,0,10,ONE_PIECE,CARBIDE,,8252,20,64,8,8,2.5,19,1,THRU,,,0,,1256637.061,0.1375,,,1256637.061,0.1375,,,50000,20000,8250,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15027-181,12mm Dia Sqr Cnr 4D,4,RIGHT_HAND,EITHER,0,0,ONE_PIECE,HIGH SPEED STEEL,,4002,12,82,52,4,0.25,12,1,THRU,,,0,,753982.2369,0.075,,,753982.2369,0.075,,,4000,4000,4000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15313-181,16mm Dia Endmill 6D,5,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,25002,16,130,100,48,4,16,1,THRU,,,0,,1357168.026,0.12,,,1357168.026,0.12,,,25000,27000,25000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15312-181,16mm Dia Endmill,5,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,25002,16,98,68,48,4,16,1,THRU,,,0,,1357168.026,0.12,,,1357168.026,0.12,,,25000,27000,25000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15311-181,16mm Dia Slotdrill,2,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,25002,16,130,100,25,4,16,1,THRU,,,0,,1357168.026,0.018518519,,,1357168.026,0.018518519,,,25000,27000,25000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15310-181,16mm Dia Slotdrill,2,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,25002,16,98,68,25,4,16,1,THRU,,,0,,1256637.061,0.05,,,1256637.061,0.05,,,25000,27000,25000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15306-181-A,6.71 x 1.5R x 2D S/Groove,2,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,1202,6.71,58,6,6,1.5,6,1,ON,,,0,,158100.65,0.08,,,158100.65,0.08,,,1200,7500,1200,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15306-181,6.71 x 1.5R x 2D S/Groove,2,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,4502,6.71,58,6,6,1.5,6,1,THRU,,,0,,569162.341,0.083333333,,,569162.341,0.083333333,,,4500,27000,4500,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15136-181,12 x 3R x 6D Finisher,2,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,5002,12,119,79,7,3,11,1,THRU,,,0,,716283.125,0.131578947,,,716283.125,0.131578947,,,5000,19000,5000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15317-181,6.71 x 1.5R x 2D S/Groove,2,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,4502,6.71,88,23,23,1.5,9,1,THRU,,,0,,569162.341,0.083333333,,,569162.341,0.083333333,,,4500,27000,4500,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15198-181,16 x 3R x 5D Rough/Finisher,3,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,7127,16,125,84,7,3,16,1,THRU,,,0,,955044.1667,0.125,,,955044.1667,0.125,,,7125,19000,7125,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15156-181,25 x 3R x 6D Rough/Finisher,3,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,6077,25,205,154,10,3,25,1,THRU,,,0,,1060287.521,0.15,,,1060287.521,0.15,,,6075,13500,6075,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15132-181,25 x 3R x 4D Rough/Finisher,3,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,11002,25,155,104,10,3,25,1,THRU,,,0,,1963495.408,0.146666667,,,1963495.408,0.146666667,,,11000,25000,11000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15158-181,16 x 3R x 6D Base Finisher,3,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,8502,16,141,100,6,3,16,1,THRU,,,0,,1030442.39,0.138211382,,,1030442.39,0.138211382,,,8500,20500,8500,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15130-181,16 x 3R x 4D Base Finisher,3,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,8327,16,109,68,8,3,16,1,THRU,,,0,,929911.4255,0.15,,,929911.4255,0.15,,,8325,18500,8325,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15287-181,12 x 0.5R x 6D Plunge,2,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,2002,12,114,76,15,0.5,12,1,BOTH,,,0,,1017876.02,0.037037037,,,1017876.02,0.037037037,,,2000,27000,2000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15289-181,25 x 3R x 5D Rougher,3,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,6977,25,180,129,8,3,25,1,BOTH,,,0,,1217367.153,0.15,,,1217367.153,0.15,,,6975,15500,6975,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15131-181,12 x 3R x 4D Finisher,2,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,10002,12,95,52,7,3.05,12,1,BOTH,,,0,,622035.3454,0.151515152,,,622035.3454,0.151515152,,,10000,16500,10000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15195-181,12 x 3R x 3D Finisher,2,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,5702,12,83,40,7,3,12,1,THRU,,,0,,716283.125,0.15,,,716283.125,0.15,,,5700,19000,5700,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15022-181,25 x 4R x 5D Finisher,3,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,6977,25,180,129,8,4,25,1,THRU,,,0,,1217367.153,0.15,,,1217367.153,0.15,,,6975,15500,6975,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15283-181,16 x 3R x 4D Plunger,2,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,2502,16,109,68,25,3,16,2,THRU,,,0,,1256637.061,0.05,,,1256637.061,0.05,,,2500,25000,2500,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15077-181,9 x .5R x 2D Finisher,2,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,5402,9,58,22,6,0.5,9,1,THRU,,,0,,763407.0148,0.1,,,763407.0148,0.1,,,5400,27000,5400,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15279-181,20 x 3R x 6D Base Finisher,3,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,11002,20,130,84,10,3,20,2,THRU,,,0,,1570796.327,0.146666667,,,1570796.327,0.146666667,,,11000,25000,11000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15157-181,25 x Sq Cnr x 6D Finisher,3,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,8102,25,205,154,6,0.25,25,3,THRU,,,0,,1060287.521,0.2,,,1060287.521,0.2,,,8100,13500,8100,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15023-181,25 x Sq Cnr x 5D Finisher,3,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,4502,25,180,129,6,0.25,25,3,THRU,,,0,,1178097.245,0.1,,,1178097.245,0.1,,,4500,15000,4500,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15011-181,25 Dia Sq Cnr 4D Finisher,3,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,9002,25,155,104,6,0.25,25,3,THRU,,,0,,1570796.327,0.15,,,1570796.327,0.15,,,9000,20000,9000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15281-181,25 x 2R x 4D Ripper,3,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,14402,25,155,104,48,2,25,3,THRU,,,0,,1884955.592,0.2,,,1884955.592,0.2,,,14400,24000,14400,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15018-181,16 x Sq Cnr x 4D Finisher,3,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,9902,16,109,68,5,0.3,16,1,THRU,,,0,,1105840.614,0.15,,,1105840.614,0.15,,,9900,22000,9900,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15216-181,3 x 1.5R x 3D Ball End,2,RIGHT_HAND,EITHER,0,5,ONE_PIECE,COATED CARBIDE,,2002,3,38,17,12,1.5,3,1,BOTH,,,0,,188495.5592,0.05,,,188495.5592,0.05,,,2000,20000,2000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15278-181,16 x 3R x 5D Thin Base,2,RIGHT_HAND,EITHER,0,15,ONE_PIECE,COATED CARBIDE,,8002,16,137,44.794,37,3,25,1,THRU,,,0,,1357168.026,0.148148148,,,1357168.026,0.148148148,,,8000,27000,8000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15276-181,16 x 3R x 6D Multi-Flute,10,RIGHT_HAND,EITHER,0,15,ONE_PIECE,COATED CARBIDE,,25002,16,142,100,48,3,16,1,THRU,,,0,,2120575.041,0.092592593,,,2120575.041,0.092592593,,,25000,27000,25000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15275-181,25 x 3R x 4D L/F Finisher,5,RIGHT_HAND,EITHER,0,12,ONE_PIECE,COATED CARBIDE,,15002,25,155,104,85,3,25,1,THRU,,,0,,1963495.408,0.12,,,1963495.408,0.12,,,15000,25000,15000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15274-181,25 x 3R x 6D Mult-Flute,20,RIGHT_HAND,EITHER,0,5,ONE_PIECE,COATED CARBIDE,,30002,25,200,149,50,3,25,1,THRU,,,0,,1570796.327,0.075,,,1570796.327,0.075,,,30000,20000,30000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15273-181,12 x 3R x 6D Plunge,2,RIGHT_HAND,EITHER,0,5,ONE_PIECE,COATED CARBIDE,,1002,12,114,76,25,3,12,1,THRU,,,0,,1017876.02,0.018518519,,,1017876.02,0.018518519,,,1000,27000,1000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15272-181,16 x 3R x 6D Plunge,2,RIGHT_HAND,EITHER,0,5,ONE_PIECE,COATED CARBIDE,,1002,16,141,100,25,3,16,1,THRU,,,0,,1357168.026,0.018518519,,,1357168.026,0.018518519,,,1000,27000,1000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15271-181,16 x 3R x 6D L/F Finisher,5,RIGHT_HAND,EITHER,0,15,ONE_PIECE,COATED CARBIDE,,16202,16,141,100,48,3,16,1,THRU,,,0,,1357168.026,0.12,,,1357168.026,0.12,,,16200,27000,16200,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15270-181,16 x 3R x 4D L/F Finisher,5,RIGHT_HAND,EITHER,0,15,ONE_PIECE,COATED CARBIDE,,16202,16,109,68,48,3,16,1,THRU,,,0,,1357168.026,0.12,,,1357168.026,0.12,,,16200,27000,16200,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15269-181,25 x 2R x 3D Ripper,3,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,14002,25,131,80,48,2,25,1,THRU,,,0,,1979203.372,0.185185185,,,1979203.372,0.185185185,,,14000,25200,14000,,,
End Mill,HPA Ecospeed - xyz Cutters,ETS15268-181,25 x 2R x 2D Ripper,3,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,14002,25,106,55,48,2,25,1,THRU,,,0,,2120575.041,0.17283951,,,2120575.041,0.17283951,,,14000,27000,14000,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgFaceMillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_MACH_QUALITY,MFG_MAX_PLNG_ANG,MFG_TL_RAKE_ANG,MFG_COMPOSITION,MFG_TOOTH_MAT,MFG_TOOTH_MATDESC,MFG_TOOTH_DESC,MFG_NOMINAL_DIAM,MFG_OUTSIDE_DIAM,MFG_OVERALL_LGTH,MFG_LENGTH,MFG_CUT_LENGTH,MFG_CORNER_RAD,MFG_BODY_DIAM,MFG_CUT_ANGLE,MFG_WEIGHT_SNTX,MFG_COOLNT_SNTX,MFG_MAX_MIL_TIME,MFG_MAX_MIL_LENGTH,MFG_TOOL_CORE_DIAMETER,MFG_TOOL_NUMBER,MFG_VC_FINISH,MFG_SZ_FINISH,MFG_AA_FINISH,MFG_AR_FINISH,MFG_VC_ROUGH,MFG_SZ_ROUGH,MFG_AA_ROUGH,MFG_AR_ROUGH,MFG_MAX_FEEDRATE,MFG_SPNDL_SPEED,MFG_FEED_VALUE,
Types,String,String,String,Integer,String,String,deg,deg,String,String,String,String,mm,mm,mm,mm,mm,mm,mm,deg,deg,String,s,mm,mm,Integer,mm_mn,mm_turn,mm,mm,mm_mn,mm_turn,mm,mm,mm_mn,rpm,m_mn,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgDrillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_MACH_QUALITY,MFG_TL_RAKE_ANG,MFG_TOOTH_MAT,MFG_TOOTH_MATDESC,MFG_TOOTH_DESC,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_LENGTH,MFG_CUT_LENGTH,MFG_BODY_DIAM,MFG_CUT_ANGLE,MFG_TL_TIP_LGTH,MFG_WEIGHT_SNTX,MFG_COOLNT_SNTX,MFG_MAX_MIL_TIME,MFG_MAX_MIL_LENGTH,MFG_TOOL_NUMBER,MFG_SZ,MFG_VC,MFG_PP,MFG_MAX_FEEDRATE,MFG_SPNDL_SPEED,MFG_FEED_VALUE,,,,,,,,,,
Types,String,String,String,Integer,String,String,deg,String,String,String,mm,mm,mm,mm,mm,deg,mm,String,String,s,mm,Integer,mm_turn,mm_mn,mm,mm_mn,rpm,m_mn,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15122-181,3.2MM DIA DRILL,2,RIGHT_HAND,EITHER,0,COATED CARBIDE,,,3.2,45,15,11,3.2,135,0.6627417,1,ON,,,0,0.033333333,75398.22369,,4000,4000,4000,,,,,,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15260-181,"0.375"" Dia Drill",2,RIGHT_HAND,FINISH,0,CARBIDE,,,9.525,88,60,60,9.525,135,1.97269,1,THRU,,,0,0.033333333,44885.50504,,50000,1500,100,,,,,,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15246-181,12.7mm Dia Drill,2,RIGHT_HAND,EITHER,0,COATED CARBIDE,,,12.7,122,85,30,12,135,2.630256121,2,THRU,,,0,0.05,79796.4534,,200,2000,200,,,,,,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15307-181,4.225mm Drill,2,RIGHT_HAND,EITHER,0,OTHER,,,4.225,110,33.92,20,9,135,0.875026151,2,THRU,,,0,0.05,79639.37377,,750,7500,750,,,,,,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15213-181,"0.165"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,4.17,115,35,33,9,135,0.863635278,2,THRU,,,0,0.05,73362.47165,,560,5600,560,,,,,,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15288-181,"0.128"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,3.251,90,27,25,9,135,0.673304146,2,THRU,,,0,0.05,102133.1772,,1000,10000,1000,,,,,,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15292-181,"0.0938"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,4.513,90,33.38,25,9,135,0.934672903,2,ON,,,0,0.05,100663.8543,,710,7100,710,,,,,,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15291-181,"0.0938"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,2.433,57,12,10,3,118,0.730946943,2,ON,,,0,0.033333333,57326.21195,,500,7500,500,,,,,,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15290-181,"0.0938"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,2.433,57,35,30,2.433,118,0.730946943,2,ON,,,0,0.05,76434.94926,,1000,10000,1000,,,,,,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15261-181,"0.25"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,6.35,84,54,30,6.35,135,0.051776695,2,THRU,,,0,0.05,79796.4534,,400,4000,400,,,,,,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15259-181,"0.190"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,4.826,74,44,44,4.826,135,0.999497326,2,THRU,,,0,0.05,80355.02857,,530,5300,530,,,,,,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15257-181,"0.453"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,11.55,136,99,99,12,135,2.392083323,2,THRU,,,0,0.05,79827.86933,,220,2200,220,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15253-181,"0.090"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,2.3,71,35,35,9,135,0.476345597,2,THRU,,,0,0.040909091,79482.29414,,900,11000,900,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15247-181,"0.160"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,4.07,85,45,43,9,135,0.842924599,2,THRU,,,0,0.05,104143.7965,,750,7500,750,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15051-181,3.3 Drill,2,RIGHT_HAND,EITHER,0,OTHER,,,3.3,80,36,34,9,135,0.683452378,2,THRU,,,0,0.05,77754.41818,,750,7500,750,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15222-181,"0.174"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,4.42,80,40,40,9,135,0.915411973,2,THRU,,,0,0.05,74983.53346,,540,5400,540,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15299-181,"0.236"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,6,80,30.58,25,9,135,1.242640687,2,THRU,,,0,0.05,98017.69079,,520,5200,520,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15260-181,"0.375"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,9.543,116,78,78,12,135,1.976420013,2,THRU,,,0,0.05,77948.5686,,260,2600,260,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15254-181,"0.164"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,4.191,81,45,45,9,135,0.86798452,2,THRU,,,0,0.05,78998.48887,,600,6000,600,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15529-181,"0.190"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,4.826,80,44,30,9,135,0.999497326,2,THRU,,,0,0.05,80355.02857,,530,5300,530,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15256-181,"0.125"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,3.175,76,40,40,9,135,0.65756403,2,THRU,,,0,0.05,79796.4534,,800,8000,800,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15255-181,"0.157"" Drill",2,RIGHT_HAND,EITHER,0,OTHER,,,4.006,76,40,40,9,135,0.829669765,2,THRU,,,0,0.05,79286.88707,,630,6300,630,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15007-181,16 L/S Location Drill,3,RIGHT_HAND,EITHER,0,OTHER,,,16,204,164,152,16,140,2.911761874,2,THRU,,,0,0.033333333,77911.49781,,155,1550,155,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15101-181,16 Location Drill,3,RIGHT_HAND,EITHER,0,OTHER,,,16,133,85,83,16,140,2.911761874,2,THRU,,,0,0.066666667,301592.8947,,1200,6000,1200,,,,,
Drill,HPA Ecospeed - xyz Cutters,ETS15048-181,26 U/Drill,2,RIGHT_HAND,EITHER,0,OTHER,,,26,102,81,81,40,180,7.96346E-16,3,THRU,,,0,0.074358974,796393.7377,,1450,9750,1450,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgSpotDrillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_TL_RAKE_ANG,MFG_TOOTH_MAT,MFG_TOOTH_MATDESC,MFG_TOOTH_DESC,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_LENGTH,MFG_BODY_DIAM,MFG_CUT_ANGLE,MFG_WEIGHT_SNTX,MFG_COOLNT_SNTX,MFG_MAX_MIL_TIME,MFG_MAX_MIL_LENGTH,MFG_TOOL_NUMBER,MFG_VC,MFG_SZ,MFG_PP,MFG_MAX_FEEDRATE,MFG_SPNDL_SPEED,MFG_FEED_VALUE,,,,,,,,
Types,String,String,String,Integer,String,deg,String,String,String,mm,mm,mm,mm,deg,String,String,s,mm,Integer,mm_mn,mm_turn,mm,mm_mn,rpm,m_mn,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Spot Drill,HPA Ecospeed - xyz Cutters,ETS15228-181,12 x 90 Deg Spot Drill,2,RIGHT_HAND,0,COATED CARBIDE,,,12,102,64,12,90,2,ON,,,0,301592.8947,0.05,,800,8000,800,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgCenterDrillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_WAY_OF_ROT,MFG_TOOTH_MAT,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_LENGTH,MFG_CUT_LENGTH,MFG_BODY_DIAM,MFG_CUT_ANGLE,MFG_TAPER_ANGLE,MFG_SIZE_DESIGN,MFG_WEIGHT_SNTX,MFG_COOLNT_SNTX,MFG_MAX_MIL_TIME,MFG_MAX_MIL_LENGTH,MFG_TOOTH_DESC,MFG_TOOL_NUMBER,MFG_VC,MFG_SZ,MFG_PP,MFG_MAX_FEEDRATE,,,,,,,,,,
Types,String,String,String,String,String,mm,mm,mm,mm,mm,deg,deg,String,String,String,s,mm,String,Integer,mm_mn,mm_turn,mm,mm_mn,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgBoringBarTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_WAY_OF_ROT,MFG_MACH_QUALITY,MFG_TL_RAKE_ANG,MFG_COMPOSITION,MFG_TOOTH_MAT,MFG_TOOTH_MATDES,MFG_TOOTH_DESC,MFG_BORE_ABILITY,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_LENGTH,MFG_CUT_LENGTH,MFG_BODY_DIAM,MFG_CUT_ANGLE,MFG_TL_TIP_LGTH,MFG_NON_CUT_DIAM,MFG_MIN_DIAMETER,MFG_MAX_DIAMETER,MFG_TIP_LENGTH,MFG_TIP_ANGLE,MFG_TIP_RADIUS,MFG_TOOL_ANGLE,MFG_WEIGHT_SNTX,MFG_COOLNT_SNTX,MFG_MAX_MIL_TIME,MFG_MAX_MIL_LENGTH,MFG_TOOL_NUMBER,MFG_VC,MFG_SZ,MFG_PP,MFG_MAX_FEEDRATE
Types,String,String,String,String,String,deg,String,String,String,String,String,mm,mm,mm,mm,mm,deg,mm,mm,mm,mm,mm,deg,mm,deg,String,String,s,mm,Integer,mm_mn,mm_turn,mm,mm_mn
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgMultiDiamDrillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_TOOL_NUMBER,MFG_NB_OF_STAGES,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_CUT_LENGTH,MFG_LENGTH,MFG_BODY_DIAM,MFG_CUT_ANGLE,MFG_TL_TIP_LGTH,MFG_TAPER_ANGLE,MFG_CHAMFR_DIAM1,MFG_LENGTH_1,MFG_CHAMFR_DIAM2,MFG_LENGTH_2,MFG_ANGLE2,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_MACH_QUALITY,MFG_TOOTH_MAT,MFG_TOOTH_DESC,MFG_TL_RAKE_ANG,MFG_RADIAL_TL_RAKE_ANG,MFG_MAX_MIL_LENGTH,MFG_MAX_MIL_TIME,MFG_COOLNT_SNTX,MFG_WEIGHT_SNTX,MFG_VC,MFG_SZ,MFG_PP,MFG_MAX_FEEDRATE,
Types,String,String,String,Integer,Integer,mm,mm,mm,mm,mm,deg,mm,deg,mm,mm,mm,mm,deg,Integer,String,String,String,String,deg,deg,mm,s,String,String,mm_mn,mm_turn,mm,mm_mn,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgBoringAndChamferingTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_TOOL_NUMBER,MFG_NOMINAL_DIAM,MFG_CORNER_RAD,MFG_OVERALL_LGTH,MFG_CUT_LENGTH,MFG_LENGTH,MFG_BODY_DIAM,MFG_TAPER_ANGLE,MFG_CHAMFR_DIAM1,MFG_LENGTH_1,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_MACH_QUALITY,MFG_TOOTH_MAT,MFG_TOOTH_DESC,MFG_TL_RAKE_ANG,MFG_RADIAL_TL_RAKE_ANG,MFG_MAX_MIL_LENGTH,MFG_MAX_MIL_TIME,MFG_COOLNT_SNTX,MFG_WEIGHT_SNTX,MFG_VC,MFG_SZ,MFG_PP,MFG_MAX_FEEDRATE,,,,,,
Types,String,String,String,Integer,mm,mm,mm,mm,mm,mm,deg,mm,mm,Integer,String,String,String,String,deg,deg,mm,s,String,String,mm_mn,mm_turn,mm,mm_mn,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgCountersinkTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_MACH_QUALITY,MFG_TL_RAKE_ANG,MFG_TOOTH_MAT,MFG_TOOTH_MATDES,MFG_TOOTH_DESC,MFG_NOMINAL_DIAM,MFG_OUTSIDE_DIAM,MFG_OVERALL_LGTH,MFG_LENGTH,MFG_CUT_LENGTH,MFG_CORNER_RAD,MFG_BODY_DIAM,MFG_CUT_ANGLE,MFG_ENTRY_DIAM,MFG_WEIGHT_SNTX,MFG_COOLNT_SNTX,MFG_MAX_MIL_TIME,MFG_MAX_MIL_LENGTH,MFG_TOOL_NUMBER,MFG_VC,MFG_SZ,MFG_PP,MFG_MAX_FEEDRATE,,,,,
Types,String,String,String,Integer,String,String,deg,String,String,String,mm,mm,mm,mm,mm,mm,mm,deg,mm,String,String,s,mm,Integer,mm_mn,mm_turn,mm,mm_mn,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgReamerTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_TL_RAKE_ANG,MFG_TOOTH_MAT,MFG_TOOTH_MATDESC,MFG_TOOTH_DESC,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_LENGTH,MFG_CUT_LENGTH,MFG_BODY_DIAM,MFG_TL_TIP_LGTH,MFG_ENTRY_DIAM,MFG_WEIGHT_SNTX,MFG_COOLNT_SNTX,MFG_MAX_MIL_TIME,MFG_MAX_MIL_LENGTH,MFG_TOOL_NUMBER,MFG_SZ,MFG_VC,MFG_PP,MFG_MAX_FEEDRATE,MFG_SPNDL_SPEED,MFG_FEED_VALUE,,,,,,
Types,String,String,String,Integer,String,deg,String,String,String,mm,mm,mm,mm,mm,mm,mm,String,String,s,mm,Integer,mm_turn,mm_mn,mm,mm_mn,rpm,m_mn,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Reamer,HPA Ecospeed - xyz Cutters,ETS15214-181,28.581mm Dia Reamer,3,RIGHT_HAND,0,COATED CARBIDE,ONE_PIECE,,28.581,118,60,25,26,1,28.581,0,THRU,,,0,0.057777778,67342.39472,,130,750,130,,,,,,
Reamer,HPA Ecospeed - xyz Cutters,ETS15250-181,33.344mm Dia Reamer,3,RIGHT_HAND,0,COATED CARBIDE,ONE_PIECE,,33.344,117,59,40,32,1,31.344,0,THRU,,,0,0.058333333,62851.95926,,105,600,105,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgTapTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_TOOTH_MAT,MFG_TOOTH_MATDESC,MFG_TOOTH_DESC,MFG_PITCH_OF_THREAD,MFG_THREAD_CLASS,MFG_THREAD_FORM,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_LENGTH,MFG_CUT_LENGTH,MFG_BODY_DIAM,MFG_TL_TIP_LGTH,MFG_ENTRY_DIAM,MFG_NB_OF_THREAD,MFG_THD_FRM_DESC,MFG_THD_CLS_DESC,MFG_WEIGHT_SNTX,MFG_COOLNT_SNTX,MFG_MAX_MIL_TIME,MFG_MAX_MIL_LENGTH,MFG_TOOL_NUMBER,MFG_CORNER_RAD,MFG_VC,,,,,
Types,String,String,String,Integer,String,String,String,String,mm,String,String,mm,mm,mm,mm,mm,mm,mm,mm,String,String,String,String,s,mm,Integer,mm,mm_mn,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgTwoSidesChamferingTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_TL_RAKE_ANG,MFG_TOOTH_MAT,MFG_TOOTH_MATDESC,MFG_TOOTH_DESC,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_LENGTH,MFG_CUT_LENGTH,MFG_BODY_DIAM,MFG_CUT_ANGLE,MFG_TL_TIP_LGTH,MFG_ENTRY_DIAM,MFG_ANGLE2,MFG_WEIGHT_SNTX,MFG_COOLNT_SNTX,MFG_MAX_MIL_TIME,MFG_MAX_MIL_LENGTH,MFG_TOOL_NUMBER,MFG_VC,MFG_SZ,MFG_PP,MFG_MAX_FEEDRATE,,,,,,
Types,String,String,String,Integer,String,deg,String,String,String,mm,mm,mm,mm,mm,deg,mm,mm,deg,String,String,s,mm,Integer,mm_mn,mm_turn,mm,mm_mn,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgThreadMillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_CUT_LENGTH,MFG_LENGTH,MFG_BODY_DIAM,MFG_TAPER_ANGLE,MFG_OUTSIDE_DIAM,MFG_LENGTH_1,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_TOOTH_MAT,MFG_TOOTH_DESC,MFG_TOOTH_MATDESC,MFG_THREAD_FORM,MFG_THREAD_CLASS,MFG_THD_FRM_DESC,MFG_THD_CLS_DESC,MFG_PITCH_OF_THREAD,MFG_MAX_MIL_LENGTH,MFG_MAX_MIL_TIME,MFG_COOLNT_SNTX,MFG_WEIGHT_SNTX,MFG_TOOL_NUMBER,MFG_VC,MFG_SZ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Types,String,String,String,mm,mm,mm,mm,mm,deg,mm,mm,Integer,String,String,String,String,String,String,String,String,mm,mm,s,String,String,Integer,mm_mn,mm_turn,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgCounterboreMillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_TOOL_NUMBER,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_CUT_LENGTH,MFG_LENGTH,MFG_BODY_DIAM,MFG_TL_TIP_LGTH,MFG_ENTRY_DIAM,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_MACH_QUALITY,MFG_COMPOSITION,MFG_TOOTH_MAT,MFG_TOOTH_DESC,MFG_TOOTH_MATDESC,MFG_TL_RAKE_ANG,MFG_RADIAL_TL_RAKE_ANG,MFG_MAX_PLNG_ANG,MFG_MAX_MIL_LENGTH,MFG_MAX_MIL_TIME,MFG_COOLNT_SNTX,MFG_WEIGHT_SNTX,MFG_VC,MFG_SZ,MFG_PP,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Types,String,String,String,Integer,mm,mm,mm,mm,mm,mm,mm,Integer,String,String,String,String,String,String,deg,deg,deg,mm,s,String,String,mm_mn,mm_turn,mm,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgConicalMillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_MACH_QUALITY,MFG_MAX_PLNG_ANG,MFG_TL_RAKE_ANG,MFG_COMPOSITION,MFG_TOOTH_MAT,MFG_TOOTH_MATDESC,MFG_TOOTH_DESC,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_LENGTH,MFG_CUT_LENGTH,MFG_CORNER_RAD,MFG_BODY_DIAM,MFG_CUT_ANGLE,MFG_WEIGHT_SNTX,MFG_COOLNT_SNTX,MFG_MAX_MIL_TIME,MFG_MAX_MIL_LENGTH,MFG_ENTRY_DIAM,MFG_TOOL_NUMBER,MFG_BALL_TYPE,MFG_VC_FINISH,MFG_SZ_FINISH,MFG_AA_FINISH,MFG_AR_FINISH,MFG_VC_ROUGH,MFG_SZ_ROUGH,MFG_AA_ROUGH,MFG_AR_ROUGH,MFG_MAX_FEEDRATE,MFG_SPNDL_SPEED,MFG_FEED_VALUE,
Types,String,String,String,Integer,String,String,deg,deg,String,String,String,String,mm,mm,mm,mm,mm,mm,deg,String,String,s,mm,mm,Integer,Integer,mm_mn,mm_turn,mm,mm,mm_mn,mm_turn,mm,mm,mm_mn,rpm,m_mn,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
ConicalMillTool,HPA Ecospeed - xyz Cutters,ETS15225-181,20 x 3R x10 Deg Taper Ball,2,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,,20,195,67.12,82.88,3,20,10,2,THRU,,6.2,5.9771682,0,,1256637.061,0.05,,,1256637.061,0.05,,,2000,20000,2000,
ConicalMillTool,HPA Ecospeed - xyz Cutters,ETS15032-181,16 Dia x 45 deg chmf,2,RIGHT_HAND,FINISH,0,0,ONE_PIECE,COATED CARBIDE,,,16,77,36,7.25,0,16,90,2,THRU,,,1.5,0,,1357168.026,0.222222222,,,1357168.026,0.222222222,,,12000,27000,12000,
ConicalMillTool,HPA Ecospeed - xyz Cutters,ETS15244-181,20 x 1R x 20 Deg Taper Ball,2,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,,20,195,98.05,51.95,1,20,20,2,THRU,,2.38,1.9696,0,,1256637.061,0.05,,,1256637.061,0.05,,,2000,20000,2000,
ConicalMillTool,HPA Ecospeed - xyz Cutters,ETS15010-181,20 x 2R x 30 Deg Taper Ball,2,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,,20,130,53.4,31.6,2,20,30,2,THRU,,4.68,3.8637,0,,1696460.033,0.1,,,1696460.033,0.1,,,5400,27000,5400,
ConicalMillTool,HPA Ecospeed - xyz Cutters,ETS15129-181,20 x 6R x 10 Deg Taper Ball,2,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,,20,170,73.54,51.46,6,20,10,1,THRU,,12.22,11.9543364,0,,1696460.033,0.1,,,1696460.033,0.1,,,5400,27000,5400,
ConicalMillTool,HPA Ecospeed - xyz Cutters,ETS15280-181,12 x 90 Deg 4D Deburr tool,8,RIGHT_HAND,EITHER,0,0,ONE_PIECE,COATED CARBIDE,,,12,90,47,4.5,0,12,90,1,ON,,2.00,3,0,,678584.0132,0.069444444,,,678584.0132,0.069444444,,,10000,18000,10000,
ConicalMillTool,HPA Ecospeed - xyz Cutters,ETS15155-181,20 x 3R x 10 Deg Taper Ball,2,RIGHT_HAND,EITHER,0,10,ONE_PIECE,COATED CARBIDE,,,20,170,42.12,82.88,3,20,10,2,THRU,,6.20,5.9771682,0,,1696460.033,0.1,,,1696460.033,0.1,,,5400,27000,5400,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,MfgTSlotterTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_NAME,MFG_COMMENT,MFG_NB_OF_FLUTES,MFG_WAY_OF_ROT,MFG_MACH_QUALITY,MFG_TL_RAKE_ANG,MFG_COMPOSITION,MFG_TOOTH_MAT,MFG_TOOTH_MATDESC,MFG_TOOTH_DESC,MFG_NOMINAL_DIAM,MFG_OVERALL_LGTH,MFG_LENGTH,MFG_CORNER_RAD,MFG_BODY_DIAM,MFG_WEIGHT_SNTX,MFG_COOLNT_SNTX,MFG_MAX_MIL_TIME,MFG_MAX_MIL_LENGTH,MFG_CORNER_RAD_2,MFG_BALL_TYPE,MFG_TOOL_NUMBER,MFG_VC_FINISH,MFG_SZ_FINISH,MFG_AA_FINISH,MFG_AR_FINISH,MFG_VC_ROUGH,MFG_SZ_ROUGH,MFG_AA_ROUGH,MFG_AR_ROUGH,MFG_MAX_FEEDRATE,MFG_SPNDL_SPEED,MFG_FEED_VALUE,,,,
Types,String,String,String,Integer,String,String,deg,String,String,String,String,mm,mm,mm,mm,mm,String,String,s,mm,mm,Boolean ,Integer,mm_mn,mm_turn,mm,mm,mm_mn,mm_turn,mm,mm,mm_mn,rpm,m_mn,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
T-Slotter,MACHINE 1,Probe,Renishaw MP700 Probe,,,,0,ONE_PIECE,,,,6,75,5.658,3,4,,OFF,,,3,TRUE,0,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,

ENDCHAPTER,NC_CORRECTORS,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,MFG_NAME_BAS,MFG_TOOL_NAME,MFG_SITE_TYP,MFG_SITE_NUM,MFG_LNG_NUM,MFG_RAD_NUM,MFG_CMP_TL_DIAM,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Types,String,String,String,Integer,Integer,Integer,mm,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,R416.2- 0127L20-21,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,R416.2- 0160L20-21,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,R416.2- 0200L25-21,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,R416.2- 0250L25-21,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,R416.2- 0350L40-21,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS15122-039,P1,1,1,0,0,,
NC_CORRECTORS,,R416.2- 0170L20-31,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15055-039,P1,1,1,0,0,,
NC_CORRECTORS,,R416.2- 0350L40-31,P1,1,1,0,0,,
NC_CORRECTORS,,R416.2- 0500L40-31,P1,1,1,0,0,,
NC_CORRECTORS,,R416.2 0170L20-41,P1,1,1,0,0,,
NC_CORRECTORS,,R416.2- 0250L25-41,P1,1,1,0,0,,
NC_CORRECTORS,,R416.2- 0350L40-41,P1,1,1,0,0,,
NC_CORRECTORS,,R416.2- 0500L50-41,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15144-036,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15073-036,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15003-036,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15159-036,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15081-035,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15045-035,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15058-035,P1,1,1,0,0,,
NC_CORRECTORS,,ETS17817-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS18029-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS17969-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS17511-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS17506-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS17507-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS17509-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS17508-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS17510-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15034-035,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15161-035,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15204-035,P1,1,1,0,0,,
NC_CORRECTORS,,ETS16006-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS17850-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS18344-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS18343-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS18151-095,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS18018-095,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS10060-035,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS10100-035,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS10082-034,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS15007-181,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS17928-095,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS18571-095,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS18569-095,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,2.0MM_DRILL,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,3.8MM_DRILL,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,4.8MM_DRILL,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,5.1MM_DRILL,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,5.7MM_DRILL,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,6.1MM_DRILL,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,6.5MM_DRILL,P1,1,1,0,0,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,6.6MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,6.8MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,6.9MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,7.0MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,7.7MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,8.2MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,8.5MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,8.8MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,8.9MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,9.0MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,9.9MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,11.8MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,14.8MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,15.8MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,17.8MM_DRILL,P1,1,1,0,0,,
NC_CORRECTORS,,ETS17926-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS18142-095,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15014-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15046-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15039-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15040-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15044-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15048-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15049-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15051-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15052-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15053-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15054-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15055-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15056-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15057-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15058-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15059-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15060-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15061-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15062-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15063-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15064-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15068-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15086-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15093-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15094-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15095-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15046-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15101-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15102-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15103-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15104-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15052-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15106-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15107-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15108-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15106-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15115-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15116-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15117-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15056-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15118-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15122-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15119-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15123-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15124-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15153-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15154-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15133-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15162-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15105-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15163-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15164-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15166-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15167-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15170-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15171-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15174-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15172-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15175-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15177-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15178-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15180-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15059-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15046-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15183-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15190-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15185-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15187-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15189-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15184-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15189-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15228-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15258-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15238-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15239-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15240-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15101-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15245-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15248-181,P1,1,1,0,0,,
NC_CORRECTORS,,ETS15249-181,P1,1,1,0,0,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS15051-181,P1,1,1,0,0,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS15253-181,P1,1,1,0,0,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS15254-181,P1,1,1,0,0,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS15255-181,P1,1,1,0,0,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,,ETS15256-181,P1,1,1,0,0,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,



**********2007***********
CHAPTER,NC_RESOURCES,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,Name,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Types,String,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_TOOLS,NC_TOOLS,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_INSERTS,NC_INSERTS,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_TOOL_ASSEMBLIES,NC_TOOL_ASSEMBLIES,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
NC_CORRECTORS,NC_CORRECTORS,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
CHAPTER,NC_TOOLS,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,Name,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Types,String,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgDrillTool,MfgDrillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgCenterDrillTool,MfgCenterDrillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgBoringBarTool,MfgBoringBarTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgMultiDiamDrillTool,MfgMultiDiamDrillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgBoringAndChamferingTool,MfgBoringAndChamferingTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgCountersinkTool,MfgCountersinkTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgReamerTool,MfgReamerTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgTapTool,MfgTapTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgSpotDrillTool,MfgSpotDrillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgTwoSidesChamferingTool,MfgTwoSidesChamferingTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgThreadMillTool,MfgThreadMillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgCounterboreMillTool,MfgCounterboreMillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgConicalMillTool,MfgConicalMillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgEndMillTool,MfgEndMillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgFaceMillTool,MfgFaceMillTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgTSlotterTool,MfgTSlotterTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgExternalTool,MfgExternalTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgInternalTool,MfgInternalTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgGrooveExternalTool,MfgGrooveExternalTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgGrooveInternalTool,MfgGrooveInternalTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgGrooveFrontalTool,MfgGrooveFrontalTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgThreadExternalTool,MfgThreadExternalTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
MfgThreadInternalTool,MfgThreadInternalTool,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
END,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
CHAPTER,NC_INSERTS,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Keywords,Name,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
 
Upvote 0 Downvote
ALL rows in ANY single CSV file will ALWAYS have the SAME EXACT count of delimiters even if every data cell in the row is empty. If the delimiter count (in this case COMMAS) is not the same in every row, then you have commas in your data.

If you have commas in your data, save the CSV file using a DIFFERENT delimiter WHICH DOES NOT OCCUR ANYWHERE IN YOUR DATA. Usually using the TILDE as a delimiter works in those cases as tildes are seldom found in data.

When you use the tilde-delimited file, you will need to inform your program that you are using TILDEs and not COMMAs in your CSV file.

So, try saving as a tilde-delimited file in both 2003 and 2007. If the data is identical, the files should be identical. If they are not, it will be much easier to see what the differences are and much easier to track down the culprit.

Being new to forums is not the issue at all. Communicating is the issue and how you communicate has nothing to do with being new here or anywhere else.

mmerlinn


Poor people do not hire employees. If you soak the rich, who are you going to work for?

"We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding. Answering questions for careless and sloppy thinkers is not rewarding." - Eric Raymond
 
Upvote 0 Downvote
Nothing that has been suggest to me is working so i have created links to 3 files

The original excel file The 2003 csv file The 2007 csv file
Hopefully it will be easier to understand if you can see the actual differences in the outputs rather than me trying (badly) to explain.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

R
  • Question
Issues with Outlook default account and performance
Replies
0
Views
200
radleymartinez
R
kwbMitel
  • Locked
  • Question
Lost edited data in Excel File
Replies
3
Views
140
Scott24x7
Scott24x7
cneill
  • Locked
  • Question
Combining If and Iferror and Index/Match with Hyperlink
Replies
18
Views
342
cneill
cneill
pendle666
  • Locked
  • Question
Microsoft Word - removing index entries with find/replace and wildcards
Replies
4
Views
1K
pendle666
pendle666
duytoi
  • Locked
  • Question
How to add a head to the search results in Excel 2016 using VBA
Replies
2
Views
1K
Andrzejek
Andrzejek

Part and Inventory Search

Sponsor

Back
Top