Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Differenciating Ringing parterns

Status
Not open for further replies.

conquer2006

Technical User
Apr 3, 2013
117
NG
On MXe III ............MiVoice level, I want to distinguish an internal call ringing partern from external call ringing partern. How do I achieve this?
 
If you are using an auto attendant good luck. It will always ring a single ring as it has been picked up already by the system unless using a console.

System options - Ringing Cadence should be set to external. Although set to internal, I had the same result, don't know if you need to reboot.


"Ringing - Discriminating
Description
Discriminating Ringing lets you distinguish between incoming internal calls, incoming trunk calls, tie line calls, and Callbacks by means of different ringing patterns (cadences).

The ringing patterns for Ringing - Discriminating are:

Incoming internal: 1.0 s on and 3 s off (internal ringing)

Incoming trunk: .5 s on, .5 s off, .5 s on, 2.5 s off (external ringing)

Callback: .5 s on, .5 s off, .5 s on, .5 s off, .5 s on, 2.5 s off.

Conditions and Feature Interactions
None.

Programming
For tie line calls, enable Ringing Cadence for Tie Line Calls in the System Options form.

Operation
None.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top