Guest_imported
New member
- Jan 1, 1970
- 0
What are the differences between a layer 3 router and a layer 2 bridge?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Difference between a router and a bridge?
- Thread starter Guest_imported
- Start date
- Status
Bridges are similar to routers in some ways, but different in others. Bridges connect two LAN segments together, whether they are the same or different architectures, i.e. an ethernet to an IPX/SPX (Novell) network segment.
They work in the data link layer (2nd layer) of the seven-layer OSI TCP/IP model. Routers work in the network layer (3rd layer) of the OSI model. Bridges are faster than routers because bridges don't have to "read" the protocol to retrieve the routing tables. In other words, you can use a bridge to connect to LAN segments that use non-routable protocols, such as NetBIOS or NetBEUI, because a bridge doesn't need or use routing tables. A switch is an example of a bridge.
They work in the data link layer (2nd layer) of the seven-layer OSI TCP/IP model. Routers work in the network layer (3rd layer) of the OSI model. Bridges are faster than routers because bridges don't have to "read" the protocol to retrieve the routing tables. In other words, you can use a bridge to connect to LAN segments that use non-routable protocols, such as NetBIOS or NetBEUI, because a bridge doesn't need or use routing tables. A switch is an example of a bridge.
NewbieNETENG
MIS
In simple terms, a bridge uses the MAC address to determine path and the router uses logical addressing. i.e. IP address. The bridge is the same thing as a switch but typically less ports.
- Status
