DID to an extension with a different number

[bparr]

With PRI service, a call is routed to the extension with the same number as the DID that the call came in on. I know there is a screen/command where you can tell the definity to send a call with one DID to a different extnesion but I cannot for the life of me remember or find it. Can anyone here help?

 

[mikeydidit]

 change inc-call-handling-trmt trunk-group 5                     Page   1 of  30
                       INCOMING CALL HANDLING TREATMENT
 Service/       Called    Called        Del  Insert           Per Call  Night
 Feature         Len      Number                              CPN/BN    Serv
 tie              5   53184                  53184
 tie              5   53180             5    53180
 tie              5   53                5    0

Is this it?

"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953

For the best response to a question, read faq690-6594

 

[bparr]

That's it. I really need to start a cheat sheet with some of these important but not often used commands.

THanks for the quick responce!

 

[mikeydidit]

It is hard to remember those that are not used daily.

Glad I could help.

"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953

For the best response to a question, read faq690-6594