Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DID List on NEAX2000IPS 1
- Thread starter RV482
- Start date
belevedere
Instructor
Tool, office data list, CMD list view, select CMD 7600.
- Thread starter
- #3
Hi Belevedere,
As always, thank you very much for the assit, this helped a lot.
Also, thank you for the E1/R2 assist, it was the timers from the Telco that was mismatched, we requested a call trace and that's were the data came out.
Again.. THANKS!!!!
As always, thank you very much for the assit, this helped a lot.
Also, thank you for the E1/R2 assist, it was the timers from the Telco that was mismatched, we requested a call trace and that's were the data came out.
Again.. THANKS!!!!
-
1
- #5
OzzieGeorge
Programmer
You don't just want CMD 7600. You need all cmd 76XX because 7600 directs the DID to tables depending on the mode the system is in. You then need to know what is in those tables, for example 7601, 7602 etc!
- Status
Similar threads