DID direct ring to AA table

[telephonesteve]

MICS 5.1XC 30BHG02 NAT
Call Pilot 150 30.00.75.22
Voicemail DN 376

I just replaced a customers old voice mail with the CP150. The customer wants a DID to ring directly to the AA for a backdoor direct access to voicemail for people out of the office. The problem is they use F982 and turn answer lines to No during the day.

How can I get this DID line 147 to ring directly to the AA table 1 if it is told not to answer via F982.

I'm sure the old NAM was set up like this but I can not remember how I did it.

I tried setting the DID line to ring in Term&sets under the VM extension (376) but this did not work.

If I set L147 with a prime set of 376 it rings directly to the general delivery mailbox.



What am I forgetting? or am I just mis-remembering (of course the customer swears it was the table 1 greeting that answered the call on zero rings).

 

[serviceboy]

set all other trunks to answer n
set up a ringing service with those said trunks and at end o dad use the services feature code to answer those said trunks...

then just set the DID u want to have answered to yes

"There are those who would make you believe there are no choices left.That they have the last word and its final.To those who try the world is wide open choices many.To those who dont only death awaits you.

 

[Crowtalks]

Just like serviceboy said, set a ringing group up with the attendant ext and the VM DN both assigned to the ringing group.
Night ring set the other trunks to the same ringing group, leave AA on with a high number of rings and program night ring (F871) to a key on the attendant console.