Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
dialplan transparency and IGAR
- Thread starter wpetilli
- Start date
latitude12
Technical User
Similar, but not the same. IGAR sends signalling traffic over the IP network, but voice over the PSTN (when bandwidth between regions can't support VoIP). DPT just sends the call over the PSTN, without the IP signalling connection (when an LSP site is isolated from the rest of the system). They both use the same configuration.
danparrish
MIS
and the dial plan transparency is meant to make it look like the system is dialling extension to extension and not over PSTN (hench the label) this makes users feel like they always use an internal call no matter what.
------------------------------------------
Self Taught Genius!!
------------------------------------------
Self Taught Genius!!
danparrish
MIS
hence ^^
------------------------------------------
Self Taught Genius!!
------------------------------------------
Self Taught Genius!!
- Status
Similar threads
- Question