Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dialpeer not matching (simple?) Outbound calls not working

Status
Not open for further replies.

ifoam

MIS
Jul 4, 2007
76
US
I have a problem but can't figure it out. Calls going outbound are not working. I get a fast busy and the following debug:

*Jul 13 15:10:41.926: //-1/80464D2D3500/DPM/dpAssociateIncomingPeerCore:
Calling Number=3615555555, Called Number=919567777777, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
*Jul 13 15:10:41.926: //-1/80464D2D3500/DPM/dpAssociateIncomingPeerCore:
Result=NO_MATCH(-1) After All Match Rules Attempt
*Jul 13 15:10:41.926: //-1/80464D2D3500/DPM/dpMatchSafModulePlugin:
dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=-1
*Jul 13 15:10:41.926: //-1/80464D2D3500/DPM/dpAssociateIncomingPeerCore:
Calling Number=3615555555, Called Number=919567777777, Voice-Interface=0x0,
Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
*Jul 13 15:10:41.926: //-1/80464D2D3500/DPM/dpAssociateIncomingPeerCore:
Result=NO_MATCH(-1) After All Match Rules Attempt
*Jul 13 15:10:41.926: //-1/80464D2D3500/DPM/dpMatchSafModulePlugin:
dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=-1


The thing is, when I do a csim using that same destination, the call matchs and goes through fine. What gives??

dial-peer voice 911 pots
destination-pattern 911
port 0/0/1:23
forward-digits 3
!
dial-peer voice 9911 pots
destination-pattern 9911
port 0/0/1:23
forward-digits 3
!
dial-peer voice 7 pots
destination-pattern [2-9]......
port 0/0/1:23
forward-digits 7
!
dial-peer voice 11 pots
destination-pattern 1[2-9]..[2-9]......
port 0/0/1:23
forward-digits 11
!
dial-peer voice 123 pots
incoming called-number .
direct-inward-dial
port 0/0/1:23
forward-digits all
!
dial-peer voice 71 pots
destination-pattern 9[2-9]......
port 0/0/1:23
forward-digits 7
!
dial-peer voice 111 pots
destination-pattern 91[2-9]..[2-9]......
port 0/0/1:23
forward-digits 11













Here is the result of the csim:

HEB-2911#csim start 919567777777
*Jul 13 15:16:53.722: %SYS-5-CONFIG_I: Configured from console by vty0 (10.11.84.2)
csim: called number = 919567777777, loop count = 1 ping count = 0


*Jul 13 15:16:56.730: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Calling Number=, Called Number=919567777777, Peer Info Type=DIALPEER_INFO_SPEECH
*Jul 13 15:16:56.730: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Match Rule=DP_MATCH_DEST; Called Number=919567777777
*Jul 13 15:16:56.730: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
Result=Success(0) after DP_MATCH_DEST
*Jul 13 15:16:56.730: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:
dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0
*Jul 13 15:16:56.730: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
Result=SUCCESS(0)
List of Matched Outgoing Dial-peer(s):
1: Dial-peer Tag=111
2: Dial-peer Tag=7
 
I got it working.

New IOS 15 toll fraud app was blocking the calls. I added the ips of the call manager to the trusted list.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top