Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
dialog 4222 ip
- Thread starter sunrise72
- Start date
This is documentmented in ALEX....
well for TSE anyway! under installation DBC 4422
you will need to telnet or SSH to a handset and use the command stated with in alex to change the password.
sorry I dont have ALEX infront of me right now.
it will then given you the password you have choosen in an encrypted form. copy it ie. cut and paste.
then take the encrypted passw and copy it into the password area of the config file for the 4422 handset and/or all handsets.....
then log on to the PABX and issue the command ipuri:dir=all; (best done after hours as all handsets will re-register). you can test it on one extension before hand if you wish to.
"I wish I was @ 127.0.0.1
well for TSE anyway! under installation DBC 4422
you will need to telnet or SSH to a handset and use the command stated with in alex to change the password.
sorry I dont have ALEX infront of me right now.
it will then given you the password you have choosen in an encrypted form. copy it ie. cut and paste.
then take the encrypted passw and copy it into the password area of the config file for the 4422 handset and/or all handsets.....
then log on to the PABX and issue the command ipuri:dir=all; (best done after hours as all handsets will re-register). you can test it on one extension before hand if you wish to.
"I wish I was @ 127.0.0.1
- Status
Similar threads
- Locked
- Question