vincer12
Technical User
- Sep 12, 2008
- 3
I want to set a trunk so that you have to dial 9 to use the trunk. What is the best way to go about this? Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
dialing rules
- Thread starter vincer12
- Start date
- Status
ElJayWilson
Programmer
In your dialplan, use a mask like this:
exten => _9NXXXXXX,1,Dial(${TRUNK}/$[w${EXTEN:${STRIPMSD}}])
Use the same method for other types of calls (800, long distance, etc).
In the globals section put the following:
TRUNK=Zap/g0 ; Trunk interface
STRIPMSD=1 ; MSD digits to strip (usually 1 or 0)
Hope this helps,
ElJay
exten => _9NXXXXXX,1,Dial(${TRUNK}/$[w${EXTEN:${STRIPMSD}}])
Use the same method for other types of calls (800, long distance, etc).
In the globals section put the following:
TRUNK=Zap/g0 ; Trunk interface
STRIPMSD=1 ; MSD digits to strip (usually 1 or 0)
Hope this helps,
ElJay
- Status
Similar threads
- Locked
- Question
- Locked
- Question