Dialing Plan 2

[beybros]

We have two t1's. One for incoming/dialing local calls and the second for long distance/international calls. How can I set this up?

 

[senk1s]

Routing and Destination codes
2 routes - one for local and one for long distance

destination codes - build locals and long distance

91any - long distance route
9011any - longdistance route
97any - local route
and so on ...

 

[hawks]

Don't forget the Toll Free numbers they need to go out oif your Local T1.

 

[beybros]

We have total of 60 ip phone in different locations. We would like to setup the way we dial out where we do not use steering code. Can we setup our dialing plan to where the system knows which path to take? Example a long distance call 12125551212 will dial out over our T1… Example local call/toll free calls dial out over the cooper lines….

Thanks for every thing

 

[senk1s]

yes that will work - when configured in the way hawks and i had posted

 

[beybros]

hawks or senkls,

on the absorblength should I use 0, all or what?

 

[hawks]

Absorb 1 just the 9 and let all the following numbers go though.