Dialing plan between sites.

[tetote]

I have replaced in my site an Octel 200 with a CallPilot 600r. the call pilot is now working correctly. But there is a dialing facility that users in the Octel could use and I'm tryin to figure out how to do it in the callpilot.

A user could login in there Octel mailbox, record a message and senit to a remote mailbox destination. He dial 274 which is the remote site destination plus the mailbox.

I'm guessing the remote voicemail strips the 274 and sends the message to the mailbox.

is there a way to do this in the callpilot?

 

[PERRYPJ]

IT'S CALLED NETWORKING, JUST ANOTHER OPTION

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[tetote]

What I have in the dialing plan of the Octel is this:

NETWORK INITIAL NETWORK NUMBER NUMBER OF
LOCATION DIGITS MAILBOX OF DIGITS DIGITS TO STRIP
NAME EXPECTED LENGTH TO STRIP FROM SELF
-------- -------- ------- --------- ---------
ALBUQU 274 7 3 0

Where exactly do I configured this in the Callpilot?

Do I have to create the remote mailbox also?