Dialing # for paging

[puckster99]

Our paging system requires using a # sign for all zone paging, is there a way for the Nortel PBX to allow this. I know # is end of dial and I know from the console you can use the EES key for entering # but is there a way to have the PBX accept the # from an IP or digital set?

Thanks

 

[KCFLHRC]

How is the page trunk configured? Probably needs to be configured as WATS to send the # as well as MANO set to yes in the route.

 

[jamie2]

What type of paging system?