Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
dialing codes
- Thread starter Ahm_mah
- Start date
In Assistant they would show under Configuration Management -> Tables -> Dial Plan -> Dial Codes
In Comwin
Reg-wabe:;
reg-wabe:,0; (and repeat if you have more than one DPLN )
Some codes are dial plan independent and some go into a dial plan, hence why reg-wabe needs running twice.
In Comwin
Reg-wabe:;
reg-wabe:,0; (and repeat if you have more than one DPLN )
Some codes are dial plan independent and some go into a dial plan, hence why reg-wabe needs running twice.
- Thread starter
- #3
- Status