Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

dialing codes

Status
Not open for further replies.

Ahm_mah

Technical User
Dec 20, 2021
24
DE
hello everybody
i have a question
how can i see the dial codes over AMO . like *40 or #44 and so on
i dont find it on manager ..?
can anybody help ?


 
In Assistant they would show under Configuration Management -> Tables -> Dial Plan -> Dial Codes

In Comwin
Reg-wabe:;
reg-wabe:,0; (and repeat if you have more than one DPLN )

Some codes are dial plan independent and some go into a dial plan, hence why reg-wabe needs running twice.
 
I normally prefer reg-wabe for this but you could use dis-wabe:; dis-wabe:,0;
 
I recommend:
"dis-wabe:gen,,0&&15;"
or
"reg-wabe:,0&&15;
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top