Dialing between BCm 50 rlease 1.0 to SRG 200 rls 3.6

[meawmeaw123]

Hi,
I have a BCm 50 rls 1.0.And also SRG 200 3.6 registered to cs1000.
I am able to call from BCm 50 to SRG but getting dead air.The SRG side is unable to hear.

Any help will be appreciated.

Regards.

 

[biv343]

Are you talking to a local mode/analog set on the SRG or an IP set registered to the SRG and redirected to the CS1000?

 

[meawmeaw123]

yes ip phone registered to cs1k

 

[biv343]

Can you successfully call from the BCM to the CS1K if bypassing the SRG? Its either a call setup issue or an IP routing/data network issue.