Hello,
I currently have a Dial-Up VPN Client using NetScreen Remote 8.3 utilising XAuth and it is configured using policy-based VPN's. This works fine in terms of connecting to the network. The VPN connection is bi-directional and the client is assigned an internal private IP address.
However, the internal network is a route-based, hub and spoke configuration. The VPN Client can connect to any systems in the directly connected hub-site, but not in any of the spoke sites.
I have tried creating policies between the Untrusted Zone, which the VPN Client connects to and the zone with all the VPN tunnels liking to the spoke sites, but to no avail.
Can anyone confirm whether they have this type of configuration working ? and if so how ?
I currently have a Dial-Up VPN Client using NetScreen Remote 8.3 utilising XAuth and it is configured using policy-based VPN's. This works fine in terms of connecting to the network. The VPN connection is bi-directional and the client is assigned an internal private IP address.
However, the internal network is a route-based, hub and spoke configuration. The VPN Client can connect to any systems in the directly connected hub-site, but not in any of the spoke sites.
I have tried creating policies between the Untrusted Zone, which the VPN Client connects to and the zone with all the VPN tunnels liking to the spoke sites, but to no avail.
Can anyone confirm whether they have this type of configuration working ? and if so how ?