Dial Plan Record, Second Digit & UDP

[huberc]

In attempting to remove "Misc" from the Dial Plan on digit 3,the system says "Second digit table must be removed first" . Attempting to remove the Second Digit Table the system says "First digits assigned in Uniform Dialing Plan; remove UDP entries" On trying to Change UDP 3, the system shows

dd Type

0x: NotInDP

00: NotInDP
01: NotInDP
02: NotInDP
03: NotInDP
04: NotInDP
05: NotInDP
06: NotInDP
07: NotInDP
08: NotInDP
09: NotInDP

and when I try to clear these I get "Invalid Entry" and Help says "NotInDP(UDP extension code inconsistent with dialplan)"

The UDP lists shows:
Uniform Dialing Plan Report

Extension Codes Type Node Number / Location Code
3100 UDPCode 212
3101 UDPCode 212
3102 UDPCode 212
3104 UDPCode 212
3200 UDPCode 210
3201 UDPCode 210
3204 UDPCode 210
3304 UDPCode 212

What should I do ??

 

[bhanson184]

So I take it you do not use DCS. If not you should be able to "change UDP 3100" or "ch udp 31" the tab through to any entry and remove the entry. Make sure you also change the second page. Do this for each two digit code 31, 32 and 33. Hopefully this will help.

BHanson

 

[huberc]

Thank you Mr Hanson. Your advice was very good. Problem is now solved.

Chris