Dial Out Without "9"

[lvjoe]

Does anyone know of an easy way to give two analog sets an exception where the AC1 code is auto-inserted (or not needed)? We have a piece of equipment that need to be connected to a CS1000E r5.0, and we can not reprogram the dial sequence on this equipment. It expects to be directly POTS connected.

I tried using this as a guide, but my prompts are much different.

http://www.ghtrout.com/ghtrout/files/dial_without_9.html

 

[PERRYPJ]

What prompts are different,those instructions are on the money

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[Avaya911PLM]

Pretranslation tables.

In the Features and Sevices NTP.

--
Fletch

Nortel Emergency Services PLM

http://nortel.com/e911

Don't forget about the FREE E911 Webinar Oct. 30th!
Register online at

http://thevoicereport.com/E911

 

[lvjoe]

I've setup the three SCL's but now have an error message:

SCH3720
The Speed Call List for the default (0) Pretranslation Calling Group
does not exist.

when I try to CHG FTR enabling PREO??

 

[lvjoe]

Thanks for the replies. I figured out my error and have it working now.

 

[johnpoole]

since all phones default to pretranslaion table 0. best to build that one PRIOR to turning it on.. 1 translates to 1 2 to 2, thru 0 to 0... it's a must to allow non translation sets to keep working..

you do know that ifyou trans 1 to 91 2 to 92 etc. that phone will not callstation to station except via did's

john poole
bellsouth business
columbia,sc

 

[johnpoole]

another way is to use a pvr.. no 9. no station to station

john poole
bellsouth business
columbia,sc

 

[lvjoe]

John, what is "pvr.."?

I am not worried about station to station though, since these are special lines connected to an alarm company. I just need to disable the dial 9 first requirement.

 

[GHTROUT]

PVR means Private Line, but in this context, it means you connect an outside trunk permanently to a station TN. In your application there is no pint in doing it since you could just order a POTS line if you wanted.

The method on my site works perfectly as far as I know. I've used it lots of times. I'd follow the directions to the last detail, trying it again.






~~~
GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies