Dial out on trunk remote BCM

[ccarmock]

I have a situation with two BCM 50's running Rel 3 (fully patched) they are networked together usign H.323 trunks.

Both have analogue trunks connected.

I have a UDP dial plan between the two of them.

I can get thigns such that oen site can call DNs on the other. I have also defined a remote access pakcage on both allowing each to have access to the trunks the other site.

When I try to dial out from a T7316E at Site A to connect to site B and dialout over one of it's trunks I find that incorrect numbers are dialled. Using BCM monitor I can see the call arring but it seems to lose digits when dialling out.

Any hints & tips on this scenario?

 

[cook1082]

Absorb should be 0 so all digits and the access of the other sides trunks can be passed on.