Dial in access on a 6509

[bmorritt]

I was just wondering if anyone has done this and if you have any information that you could share.   I am not finding a whole lot on the Cisco web site, atleast not concerning the 6509.

 

[morshed]

As I know there is no dial access module for 6509. you can use an access server (such as Cisco 2511) instead and connect it to your 6509, through an 10BaseT interface.

 

[bmorritt]

Actually I finnally figured out how to gain dial in access and plan on posting the info here in the near future. You need an external modem and plug into the console port.