Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DIAG1051....?

Status
Not open for further replies.

jaxuser

Technical User
Apr 6, 2006
320
US
Can anyone tell me what this is? I haven't been able to find anything in 7.5 docs.
Thank you.
 
Don't worry about these. They are caused by the following patch:

CCMS: Call ID Problems. *** NOTE: This Patch is a Merge of Call ID PEPs from prior releases MPLR29159, MPLR30055, & MPLR26580. Conflicting PEPs that are merged and obsoleted p28475_1 p29352_1 p29370_1. *** *** NOTE 2: THIS PATCH CAN PRINT DIAG1051 MESSAGES ***

DIAG1051 messages are for GNTS.
 
MPLR31164_1
PATCH
CPP4 (.pp4)
07.50Q
RELEASED
GEN
05-JUL-2011
X21 07.61A
Core
Core
Title
DIAG1051 message printed From VALIDATE_CALL_ID


Hope this helps.

 
Thank you...I apologize for the delay in response...I am off to bigger and worse issue elsewhere...
Thanks again
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top