I have a switch which is being used for IPT, the set up is that a single port is used by IPT phone and P.C. Each VLAN - Data, voice will need to have a separate IP address via DHCP scope. So port 1 have data Vlan 2, voice vlan 3, port 2 data vlan 2, voice vlan 3 etc up to port 24. I also have a separate DHCP set up with the different scopes
VLAN 2 IP range 10.2.0.0
VLAN 3 IP range 10.3.0.0
Th eidea is that the PC and Phones pick up the different VLAN/ IP address
The switch will be connected in two different ways as te lan goes on
Option 1 Switch is connected to the Phones/ PC but also the DHCP server is also connected to the switch
Option 2 The switch connetced to the phones/ P,C but now the switch is connetced to a router which is connected to another switch which the DHCP server is connetced to- hop one
If I want to extend this so that switch port 10 has data vlan 2 but now have voice vlan 15 and so has a difference IP Address to the other Voice vlans/ phones
VLAN 2 IP range 10.2.0.0
VLAN 3 IP range 10.3.0.0
Th eidea is that the PC and Phones pick up the different VLAN/ IP address
The switch will be connected in two different ways as te lan goes on
Option 1 Switch is connected to the Phones/ PC but also the DHCP server is also connected to the switch
Option 2 The switch connetced to the phones/ P,C but now the switch is connetced to a router which is connected to another switch which the DHCP server is connetced to- hop one
If I want to extend this so that switch port 10 has data vlan 2 but now have voice vlan 15 and so has a difference IP Address to the other Voice vlans/ phones