DHCP with Cisco 806

[cyberspew]

I have a Cisco 806 Router I would like to know how to have the DHCP server of my cable inet assign my e1 (the port plugged ingo the cable modem) 5 IP address instead of just 1.

 

[computron007]

Hey Spew Im having the same Problem let me know if you get it working thnx COMP

 

[BOKA]

You cannot have your cable modem to assign you more IPs (unless they can sell you more IPs on their box).
You can, however, configure your 806 to use NAT. Take a read here:

http://www.cisco.com/en/US/tech/tk86/tk89/technologies_configuration_example09186a0080093fc6.shtml

and here (for the NAT section):

http://www.cisco.com/en/US/products...tion_guide_chapter09186a008007c79d.html#69031

Good luck.

 

[computron007]

Thnx boka but we have 5 DHCP address from the cable provider (working on same exact problem
)

 

[BOKA]

What is the problem you are having, then? I thought you need more IPs. But if these 5 IPs all you need, what is the use of 806?