DHCP scope ips 10.60.101.x can not access the internet network of 10.60.6.x

[rbritton1814]

SO when I connect to my vpn I get an ip of 10.60.101.x and when I try to ping or remote desktop to anything on the 10.60.6.x network I do not get any replies.

Your help with this would be greatly appreciated.

 

[jasonmerchants]

Check your routes and NAT entries -- ensure that you are able to route to and from your VPN network (running any dynamic routing protocols)?

You may also need to set up additional NAT entries between your VPN and network....

A sanitized configuration will make this process easier.

Jason
Network Engineer, Cisco & Nortel