Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DHCP scope ips 10.60.101.x can not access the internet network of 10.60.6.x

Status
Not open for further replies.

rbritton1814

IS-IT--Management
Apr 9, 2013
1
CA
SO when I connect to my vpn I get an ip of 10.60.101.x and when I try to ping or remote desktop to anything on the 10.60.6.x network I do not get any replies.

Your help with this would be greatly appreciated.
 
Check your routes and NAT entries -- ensure that you are able to route to and from your VPN network (running any dynamic routing protocols)?

You may also need to set up additional NAT entries between your VPN and network....

A sanitized configuration will make this process easier.

Jason
Network Engineer, Cisco & Nortel
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top