Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DevPack

Status
Not open for further replies.
JacobNunley

JacobNunley

IS-IT--Management
Jan 17, 2007
69
US
I have to install a new DevPack in order to use the 7921 phones. Is there anything I need to know about the DevPack install? Any Concerns I should have? (Callman 4.1)

Jacob
 
Sort by date Sort by votes
When you install it, it will automatically upgrade all the device defaults unless you say No. If No then it just installs the loads but does not upgrade the device defaults page and you locate the new one you want via explorer and then load it into the specific device default. The issue being if you upgrade the defaults then potentially all your phones may see the new load and upgrade at once - it depends if you want this
 
Upvote 0 Downvote
All I'm after is the support and firmware for the 7921. I dont want all the other phones getting new firmware at this point. I'm guessing I need to install this on pub first then install it on sub?
 
Upvote 0 Downvote
Install it on whatever server is acting as the TFTP server (or servers) in the cluster.
 
Upvote 0 Downvote
Best practice is to install it on all servers even if you only have one TFTP server. As you said publisher first, followed by your TFTP server (if it is not the same box), and all your subscribers afterwards.
As if you are doing an upgrade.

Doing it on the publisher/TFTP server only will work also.
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top