Devlink3 1

[C0mmUN1cAt0r]

Hi, I'm aware you can connect a 3rd party application to multiple IP Office's through Devlink3, but does anyone know how many concurrent Devlink3 connections a single instance of ip office supports?
So based on multiple applications requiring a devlink connection to the one ip office e.g. a call logger and then a call recorder?

 

[Pepp77]

Generally, this is either connecting via Tapi or via the monitor port. I am not aware of an obvious limit to the number of simultaneous connections these can handle.

| ACSS SME |

 

[janni78]

Depends on what hardware and version you are running.

[URL unfurl="true"]https://downloads.avaya.com/css/P8/documents/101039410[/url]

"Trying is the first step to failure..." - Homer

 

[C0mmUN1cAt0r]

Hi thanks but on the doc there is no mention of devlink just Cti and tapi?

 

[janni78]

And DevLink is not CTI ? =)

"Trying is the first step to failure..." - Homer

 

[janni78]

Well, this is what the documentation says

When monitoring events, a maximum of 3xDevLink3 connections are allowed to a single IPOffice.
If using multi-node flags, only 3xDevlink3 connections are allowed on a single SCN.

"Trying is the first step to failure..." - Homer

 

[C0mmUN1cAt0r]

Hmm, thanks janni that’s what I was after though I ran a search on the doc for decline and it came back with no hits

Have a star though

 

[C0mmUN1cAt0r]

Devlink I meant!

 

[janni78]

It's in this one [URL unfurl="true"]https://www.devconnectprogram.com/fileMedia/download/409ad2ad-05f4-4388-adbe-78d6644faa88[/url]

"Trying is the first step to failure..." - Homer