Determine Option 21 DNs 2

[bcmfiftyfan]

Hello, got a job coming up for a customer with an Option 21, 2 PRIs, approx. 280 digital sets and 30 analog sets. Customer is having all new voice and data station wiring installed. I'll be swinging all the digital and analog sets over to the new feeders and station cables in a month.
Question: what is the feature code to enter at a digital set that will show me that set's DN?
I'm a BCM tech so please bear with me.
Thanks in advance, Lanny

 

[GHTROUT]

Sadly, there is not such a code. You have to call someone that has a digital display - and they tell you what number you are at.

~~
Gene at GHTROUT.com

 

[bcmfiftyfan]

Thanks for the quick response.

Got another quick question if that's okay - I've heard that once in a while a TN will freeze up and it's necessary to disable then re-enable the TN in programming to get the phone working again. What is the exact process to do this?

 

[GHTROUT]

To Disable

>LD 32

.DISU 2 0 3 4 (If 2-0-3-4 was the TN)

To Enable

>LD 32

.ENLU 2 0 3 4 (If 2-0-3-4 was the TN)



~~
Gene at GHTROUT.com

 

[hawks]

go to LD 81
REQ lst
CUST 0
DATE
PAGE
DES
FEAT 500
FEAT 2000

That should show them as: (500 = analog & 2000 = digital)

type cust ext TN
500 00 1633 024 0 14 11
2000 00 1809 08 0 00 00

 

[hawks]

sorry I read the original post wrong, but LD 81 still might help.

 

[cliffordcannedy]

BCMFIFTY being that you are a BCM guy you mind lending me a little help. I have phones down, and dont know where to start.
Thanx

 

[vtphoneguy]

@clifford, try posting your BCM problem in the BCM forum. I bet you will get some response

 

[bcmfiftyfan]

I'll be happy to assist you clifford. Please do as vtphoneguy said and post in the BCM forum.

 

[bcmfiftyfan]

Many thanks GHTROUT. Thanks also hawks.

 

[Firebird Scrambler]

If you want a complete list of extensions and port numbers, then download this and follow the instructions.

http://www.ghtrout.com/conversionutility

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.