I am new in the field and hopefully won't bore anyone with my question as I am sure it is very basic. I installed a new HD onto a server and installed arcserve so I can backup data on WS on my network. I am having trouble pointing the destination to the new HD. Any adivce would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Destination 1
- Thread starter Cafi
- Start date
-
1
- #2
speshalyst
IS-IT--Management
HI,
You cannot point to a HD as a destination..
You need to configure a FSD(File system device). While configuring this you can point to a folder on the new HDD.
Now ARCserve would see this FSD as a blank media to which you can point your backups..
Please run thru the admin guide on the BAB install CD for further details on creating/configuring FSDs.
Hope this helps..
So it Shall be Written!
So it Shall be Done!!
You cannot point to a HD as a destination..
You need to configure a FSD(File system device). While configuring this you can point to a folder on the new HDD.
Now ARCserve would see this FSD as a blank media to which you can point your backups..
Please run thru the admin guide on the BAB install CD for further details on creating/configuring FSDs.
Hope this helps..
So it Shall be Written!
So it Shall be Done!!
- Thread starter
- #3
- Status