Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

desactivate a phone number

Status
Not open for further replies.

zizzou

Programmer
Mar 3, 2003
3
TN
Hello everybondy

I wanna know how to desactivate the communication when a user try to dial a number that begin with a 2. The user to take a line he must type 0. Sorry for my english.

 
Hi zizzou !

You need to remove the number 2 from the Number analysis table (NACDR) if you do that only extensions with CDCAT 15 can dial this number. Of course you need to be sure you don't have anything else beginning with a 2 that the users should be able to dial.

Good luck.
 
Thanks MDEXPERT
Please MDEXPERT i'm new, very new to MD110, can you show me how i type exactly the command to do this.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top