Deny access to a group paging extension

[rak342]

Can someone explain- I setup a group-paging of 32 and I only want to allow a few extensions access to this "Group paging extension number 1029", how is this done? COR?

Thank you for your help.

 

[joe2938]

yes you should be able to restrict access by cor

 

[rak342]

Thanks joe2938
Can you explain how in COR I would only give a couple of extension access to 1029?

 

[joe2938]

1st pick an unassigned cor and assign that to your paging users, then on the cor on page 3 or 4 and deny calling form all cor's to your paging cor, also make sure the paging cor is the same for the paging users, pretty straight forward

 

[rak342]

OK Thank you joe2938 that worked..

 

[joe2938]

Awesome!

 

[rak342]

I just found out after doing more testing that once I give that new COR to an extension I can't transfer a caller to that phone. Any suggestions?

 

[joe2938]

Try this; give your paging users a cor that can be called by the other users on the system, but the cor used by the paging system should only allow calls from users who access the paging