Denied numbers and distance from switch

[softnoggin]

q's on a Meridian Opt11.

We can't dial through the switch to a number that should be a local call. How can I get a list of denied numbers? LD 49? And how can I re-enable if it is on the list? What if it isn't denied?

Also, how far from the switch can a digital set be? We have an outlying office that has requested sets with displays, but my attempts have failed although I can use the TN in the closet.

Thanks so much

PV

 

[Cawho]

>ld 90 (you get the list from LD 90)
ESN000

MEM AVAIL: (U/P): 3450025 USED: 3185494 TOT: 6635519
DISK SPACE NEEDED: 1020 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED)
REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE npa

NPA 514

NPA 514
RLI 20

DENY 9480172

DENY 976

SDRR DENY CODES = 37
ITEI NONE



MEM AVAIL: (U/P): 3450025 USED: 3185494 TOT: 6635519
DISK SPACE NEEDED: 1020 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED)
REQ chg
CUST 0
FEAT net
TRAN ac1
TYPE npa

NPA 514
RLI
SDRR deny
DENY x9480172 (use an x in front to remove it)
DENY
SDRR
ITEI

NPA


MEM AVAIL: (U/P): 3450029 USED: 3185490 TOT: 6635519
DISK SPACE NEEDED: 1020 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED)
REQ

Did this help?

About the distance I don't know but it is far if your wiring is not JKT. (has to be twisted pair)

Cawho
PBX.Tech

 

[McGruff753]

I think the distance number is somewhere in the neighborhood of 3000 feet.

 

[tipopen]

3500 feet loop lenght over 22awg. For multiple cross connects 3000 feet will work fine.

 

[softnoggin]

Thanks for the responses.

The distance ones make sense; we are definitely beyond those numbers.

Cawho, special thanks to you, but I don't show any numbers denied for the area code, just "976".

PV

 

[softnoggin]

To Cawho

Thanks for pointing me to the answer. The number wasn't denied, but there was no NPA data block for 10 digit dialing. All were set for 1+.

Ciao

 

[Cawho]

Excellent, true!

You are welcome my friend!
Did you notice if the PBX uses the AC2 for long distances ?

Cawho
PBX.Tech