sliderplot
Technical User
Tried to verify that international calls are allowed, checkout the below information.
Got the following information from LD 90:
REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE spn
SPN 011
SPN 011
FLEN 0
INPL NO
RLI 4
SDRR NONE
ITEI NONE
I am guessing that 'INPL' equals 'NO' means no global international calling is allowed. Then I would guess that I could set up individual phone extensions to be allowed to make outbound international calls.
Changed to LD 86:
REQ prt
CUST 0
FEAT rlb
RLI 4
RLI 4
ENTR 0
LTER NO
ROUT 1
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 5
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ NO
ISET 0
NALT 5
MFRL 5
OVLL 0
Information from LD 87:
REQ prt
CUST 0
FEAT nctl
NRNG 5
SCBQ NO
NCOS 5
EQA NO
FRL 5
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0
TOHQ NONE
I should be allowed to make international calls from any phone that NCOS equal or greater than FRL or am I missing something that is preventing me to allow select phones to call international?
Thanks
Got the following information from LD 90:
REQ prt
CUST 0
FEAT net
TRAN ac1
TYPE spn
SPN 011
SPN 011
FLEN 0
INPL NO
RLI 4
SDRR NONE
ITEI NONE
I am guessing that 'INPL' equals 'NO' means no global international calling is allowed. Then I would guess that I could set up individual phone extensions to be allowed to make outbound international calls.
Changed to LD 86:
REQ prt
CUST 0
FEAT rlb
RLI 4
RLI 4
ENTR 0
LTER NO
ROUT 1
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 5
DMI 0
FCI 0
FSNI 0
SBOC NRR
CBQ NO
ISET 0
NALT 5
MFRL 5
OVLL 0
Information from LD 87:
REQ prt
CUST 0
FEAT nctl
NRNG 5
SCBQ NO
NCOS 5
EQA NO
FRL 5
RWTA NO
CBQ NO
SPRI 0
MPRI 0
PROM 0
TOHQ NONE
I should be allowed to make international calls from any phone that NCOS equal or greater than FRL or am I missing something that is preventing me to allow select phones to call international?
Thanks