Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

denial event 2329: No BW, prowler

Status
Not open for further replies.

ClovistheCat

Technical User
Jan 21, 2008
20
US
--------------------------------------------------------------------------------

I just installed a standalone G450 s8300. I am trying to login into ip softphone but getting the following on a traceI can connect to ip softphone I just get a no resources avaialble when trying to get dial tone)
17:38:50 denial event 1243: ? D1=0x95c D2=0xd1
17:38:50 active station 65219 cid 0xd1
17:38:50 denial event 2329: No BW, prowler <--> IP ep D1=0x1 D2=0x1
17:38:50 denial event 2329: No BW, prowler <--> IP ep D1=0x1 D2=0x1
17:38:55 idle station 65219 cid 0xd1

I have check my ip-network-regions, the seem ok.. but to be honest I get confused with them.
region 1 is the location codec 1 g711mu
region 2 is the ia770 codec 2 g711mu
I created region 249 labled ip code 3 g729

So here is what each region (page 3) looks like
change ip-network-region 1 Page 3 of 19
Inter Network Region Connection Management

src dst codec direct WAN-BW-limits Video Intervening Dyn
rgn rgn set WAN Units Total Norm Prio Shr Regions CAC IGAR AGL
1 1 1 all
1 2 2 y NoLimit n all
1 3
1 249 1 y NoLimit n
1 250

change ip-network-region 249 Page 3 of 19

Inter Network Region Connection Management

src dst codec direct WAN-BW-limits Video Intervening Dyn
rgn rgn set WAN Units Total Norm Prio Shr Regions CAC IGAR AGL
249 1 1 y NoLimit n all
249 2 2 y NoLimit n all
249 3
249 248
249 249 3 all
249 250


what am I missing???
 
The ip-network-regions should be connected to each other with codecs that match the compression mode. So if region 1 talks to region 249 with codec 1 and region 249 has codec 3 then codec 1 and codec 3 must have a common compression mode (eg. G711 or G729)in both of them. The same compression mode must exist in both codecs. Also make sure that the VoIP module on the G450 works OK.

Petran
Avaya Certified Expert
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top