Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dell XPS 410 video problem

Status
Not open for further replies.

mangurian12

Technical User
Jan 1, 2009
3
US
I have an XPS 410 running Windows XP withan Nvidia 7300LE graphics card.

I am getting a noise pattern which builds up (it doesn't pop-up all at once).

Two picture are inculded below.

It also happens when I boot in SAFE mode.

If I refresh the screen or open a new full screen window the pattern disappears and the starts to build up again.

This also shows up when I use the TV out to my TV set, so it is not the monitor.

Anyone seen this? I think it must be the video card, but I hate to buy a new one and then find out it is something else.
 
Looks like a memory problem on the GFX card, where it is possibly overheating...

I would suggest that you first attempt to clean it out, the XPS, and then if it does not help, then try another graphics card, a card with a better spec can be had for squids these days...

e.g. SPARKLE SFPX94GT512U2 GeForce 9400 GT 512MB 128-bit GDDR3 PCI Express 2.0 x16 HDCP Ready Video Card - Retail


Ben

"If it works don't fix it! If it doesn't use a sledgehammer..."
 
Many thanks Big.

I found a video memory diagnostic. Sure enough it had memory errors.

I have ordered the card from Newegg.

Once again...thanks.

Vic-20
C-64
Amiga 500
Amiga 1000
Amiga 3000 all gone to computer heaven.
 
Vic-20
C-64
Amiga 500
Amiga 1000
Amiga 3000 all gone to computer heaven.
what a shame...

I still have the C128D, SX64, Amiga500+, Amiga600, and Amiga1200, all still kicking, though I use them less and less as time goes by...

glad that you found the problem... and I hope that the card you ordered fits well into the XPS...


Ben

"If it works don't fix it! If it doesn't use a sledgehammer..."
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top