Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dell Screw Size - E6540

Status
Not open for further replies.
Oct 7, 2007
6,597
US
I'm looking to get some screws that hold the hard drive caddy to the body of a Dell Latitude E6540. Where do you get the information on screw size? It's not in the user manual and there doesn't seem to be a hardware maintenance manual. Any clues?

"Living tomorrow is everyone's sorrow.
Modern man's daydreams have turned into nightmares.
 
Buy them off ebay. You usually you get the screws with the caddy. If not, look for Dell screws and you'll get you choice of many.

Ed Fair
Give the wrong symptoms, get the wrong solutions.
 
I did buy off ebay - wrong screws shipped with caddy!!! Need to get the specs so ebay seller can "make it right".
My choice of many means nothing as there are about 6 sizes of screws on that laptop.

"Living tomorrow is everyone's sorrow.
Modern man's daydreams have turned into nightmares.
 
I believe the majority of Dell laptop HDD caddy screws are M3x3mm.

I went to Link - If you hover over the 13th photo, you'll see the info.

Expecting the world to treat you fairly because you are good is like expecting the bull not to charge because you are a vegetarian.
 
Well, here are the screw listings from my service tag information. The screw is 8mm long so, it must be
WYNH6 SCREW, 2.0X8.0, STAINLESS STEEL, MACHINE SCREW, YNL, E3
but.... strange that it doesn't say M2x8.0

The logical way to figure this out is to have an M2 nut and test it, but I don't have one.

D6P80 KIT, SCREW, SECURITY, PORTABLE, E3
4XV60 SCREW, M2X1.5, K SCREW HEAD, MICROSOFT, BLACK OXIDE, OPTICAL DEVICE DRIVE
4270E SCREW, M2X3, K SCREW HEAD, MICROSOFT, BLACK OXIDE
DF5C7 SCREW, COSMETIC, M2.5X0.45+5K, NL, BLACK
JTN9C SCREW, M2X2.8, FLAT HEAD, MACHINE SCREW, CHIP SET, E6520
4270E SCREW, M2X3, K SCREW HEAD, MICROSOFT, BLACK OXIDE
WYNH6 SCREW, 2.0X8.0, STAINLESS STEEL, MACHINE SCREW, YNL, E3
GKCRN SCREW, M3X3, PHH#1, MACHINE SCREW, NICKEL PLATED, PHTM
D7PJ5 SCREW, COSMETIC, M2X0.4P+3FP, ZK, NL, B
63PDH SCREW, M2.5X5, PHILLIPS HEAD, THREAD FORMED, BCS
4270E SCREW, M2X3, K SCREW HEAD, MICROSOFT, BLACK OXIDE


"Living tomorrow is everyone's sorrow.
Modern man's daydreams have turned into nightmares.
 
Go to Lowes, and in the hardware drawers they have them for like .27. But can work for a test.
 
Really? I would never think that they would have such micro screws/nuts. I'll do it if that trip can settle things.

"Living tomorrow is everyone's sorrow.
Modern man's daydreams have turned into nightmares.
 
check online, they can even tell you what the stock status is for the local stores.
 
Confirmed that the 4 screws on the back of the E6540 are all M2x8mm. There are two that hold the hard drive caddy in place and two more holding the back cover in place.

Got them at laptopscrews.com
M2x8mm Black OEM Wafer Head Machine Screw

"Living tomorrow is everyone's sorrow.
Modern man's daydreams have turned into nightmares.
 
sellers on ebay prob sell them as "Dell latitude X screws" etc.. good luck!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top