Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DELL RD1000 on SCO Unix 6.0

Status
Not open for further replies.

dellit

IS-IT--Management
Jan 21, 2007
65
IT
Hi,
how can I configure a internal unit DELL RD1000 sata 6.0 on SCO UNIX ? Server PowerEdge T310
Thanks for the support
 
You are talking about the RD1000 disk drive, right? If external, I doubt it will play with SCO.

If it's internal, check this SCO.com TA: 126631 and see if the SATA chipset is one of the supported Intel ones.

If the SATA chipset is not supported, you have to switch the BIOS SATA setting to Legacy or IDE, then use the SCO wd driver.

----------------------------------------------------------------
Pat Welch, UBB Computer Services, a WCS Affiliate
SCO Authorized Partner
Microlite BackupEdge Certified Reseller
Unix/Linux/Windows/Hardware Sales/Support
(209) 745-1401 Cell: (209) 251-9120
E-mail: patubb@inreach.com
 
Hi patw,
thanks for the response.
SCO Unix 6.0 during setup has already installed the driver SATA.
To use, run mkdev hd?
I have to create the vxfs filesystem to copy files

How do I add a new hard disk on the Sco System ?
Thanks

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top