Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dell Laptop RAM Install

Status
Not open for further replies.

macten88

Technical User
May 11, 2004
212
US
I installed a stick of 256MB of RAM in a Dell Laptop the other day. There was only one slot so I removed the 128M stick and put in the 256M stick. I went into properties of My Computer and it said that 320M was installed. So how can it say 320 when there is only 256 installed?
 
Before I began, I checked to see how much she had. My Computer , Properties said 128MB. The onboard 64MB didn't show up before I started. Why would it show up after I put in the 256MB?
 
Howdy:

Are you sure you pulled a 128meg stick or just a 64meg stick??

Try pulling the new stick and see if the system works !!

Murray
 
Thanks for the replies. I'll send her an email and have her look at that RAM stick that I took out.
 
I'll bet your right SESASKDFC. That was probably a 64M stick that I took out....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top