Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dell Inspiron 8500 Memory problem. Cant recognize from DIMM-B slot

Status
Not open for further replies.

Vallurupa

Programmer
Oct 17, 2001
38
US
Hi,
I have Dell Inspiron 8500. It came with 256MB (128MB in each slot).
I upgraded it to 1GB ( 521MB +512NB). It worked with 1gb somedays. Then it started showing 521MB. Madesure that there is not problem with memory modurels. both modurles work in DIMM A slot. But DIMM -B is not recognizing memory at all so sytem cant boot with DIMM -B. Anybody has same problem? How to fix it?
Please help me.

THanks in advance,

Kishore
 
If it worked correctly with 2 x 512MB previously but now Slot B doesn't recognise either module, it suggests a broken MoBo.

I suggest that you try resetting the BIOS first and check that Slot B contacts look OK and not obviously damaged. If that doesn't get it going then a replacement MoBo is th eorder of the day.

If you take out the bad MBo, it should state on it somewhere the make and model. A replacement shouldn't be too difficult to find.


Regards: tf1
 
Vallurupa,
Are you certain that the memory is being seated all the way in slot B?

With laptops,it can sometimes appear that the memory is all the way in when it actually isn't.

"It worked with 1gb somedays."

I would probably suspect that the sodimm being put into slot "B" isn't getting seated and worked its way out.
 
Cleaned the slot and then installed memory.. Holded littlebit . Then tried. It is picking now. I can see memory from both slots. Thanks a lot for your help. My laptop is fully functional. :)

Regards,
vallurupa
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top