Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Dell 1600sc Hung in Startup

Status
Not open for further replies.

prashantbsharma

Technical User
Apr 19, 2012
2
OM
Dear..

I have Dell Poweredge 1800, last three month i'm not using that server but now i've some work so when i'm going to start its struck on start-up and option also not work like (F2- Setup,F11 Utility & F12) and The error is showing that mention below please help me to find this solution.

Error.

"Invalid Configuration Information - please run SETUP program
Two 2800 MHz Processors, Processor Bus:533MHz, L2cache:512 DB

Primary Hard disk darive 0 not found
Secondary hard disk drive 0 not found
Time of day not set - please run SETUP program
LSI Logic Crop. MPT BIOS
Copy right 1995-2002 LSI Logic Corp.
MOTBIOS -5.06.01
Dell Build

LSI Logic Corp. MPT boot RIM no supported Device Found !

PowerEdge Expandable RAID contrlloer BIOS 1.05 Apr 11, 2003
Copyright (C) LSI corp,m
press <Ctrl><M> to run configuration utility
or press <Ctrl><H> for web bios."

Help me to solve this error......................
 
Assuming you boot from the raid, as it is enabled...
Well your CMOS battery needs replacement, which reset your bios to it's defaults. Get a wafer battery from RadioShack, after replacement, there should be an option to set the boot order, the Lsi boot array should be in the list.
If you can not get it going, call Dell, they have free support, even for older servers.


........................................
Chernobyl disaster..a must see pictorial
 
Dear Technome,

Thanks to answer...

I Changed the BIOS battery but still no luck, same error is showing you have any more idea about that one.
 
Have you removed all unnecessay devices connect to mobo, remove CDrom, floppy, get a different mouse and keyboard. If you have multiple ram sticks, remove half of them, try and boot, if no go remove the present ram, swap in the removed ram and try; if you have compatible ram from another machine, try that.
Pull battery and unplug, leave in that state for a few hours, then reverse.
Open case, check for bulging/leaking capacitors.

........................................
Chernobyl disaster..a must see pictorial
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top