Dell 130T uses always the same DLT drives

[azzurri]

Dell 130T with 4 DLT 7000 drives. Be 8.0.

The jobs works fine but only the 1st and 4th DLT drives are used despite other jobs
are pending.

Any idea
Thanks
azzurri

 

[javier95]

I am having the same problem with Dell 130T with 4 DLT 7000 drives. Be 8.6.

The jobs work fine but only the 2nd and 3rd DLT drives are used. If I try to use the other two drives the job staus doesn't get past loading media. Were you able to resolve this issue? If you did can you point me in the right direction. Any Idea?

Thanks,
Javier

 

[azzurri]

I resolved the problem....
Backup Exec 8.0.
Clock on "Devices", All Devices\Drive Pools\All Drives.
Right click the partition, "Add Drives" and
add the drives not used before.

Hope it helps