Deleting UG50 Trunks 1

[SamThePhoneMan10]

Hello

We are currently decommissioning a UG50 at a remote site and are having trouble removing a route/trunks. The UG50 registers to a SV9500 switch. We have removed the route from AOPR and ARNP as well as removed the COTS care from the switch associated to the UG50 with AMGIL. We are still unable to delete the trunks with ATRK.

 

[phadobas]

What error message are you getting? Also, did you remove those trunks from LCR (with the AFRS/L/N commands)?

 

[3racefan3]

If they are DIT'd In ASCI it will prevent you from deleting them.

 

[SamThePhoneMan10]

If they are DIT'd In ASCI it will prevent you from deleting them.

That’s what it was. Thank you