Deleting System Speed call

[T8keiteasy]

HI,

Does anyone know how is it possible to delete a full range of system speed call in a row ?

I have 25 pages I want to delete, and the unique way seems to be one by one...
Any idea ?

Regard

Now, it's about French users too !!!

 

[paterson]

Not fully sure if it will work, but what about trying to load a blank form from another system?


**************************************
My Biggest problem is that I almost always believe what I tell myself.

 

[TETech]

Escape 2 to range program leave blank hit esc 2 again enter number of lines it will blank this many then commit and confirm.

 

[paterson]

I assumed 3300ICP. What system do you have?


**************************************
My Biggest problem is that I almost always believe what I tell myself.

 

[T8keiteasy]

Hi,

I've tried to load a page only with the speed call I wanted to keep...doesn't work. I guess blank file is the same...

I'm not sure I understood TETech info, but I gonna try it and keep you in touch...

I have a 3300 ICP MX type. v 7.1.4.9

Thanks

Now, it's about French users too !!!

 

[paterson]

TETech's info is for an SX-2000. Escape+2 is for the softkeys at the bottom of the form while using a Terminal Emulation program like Procomm or Hyperterminal. It will not work for the 3300 unless you are programming via Telnet. By the way, programming via Telnet is not recommended as it has been known to cause database corruption. Mitel will periodically issue approved work-around proceedures that involve Telnet. I would suggest limiting your telnet use to those.

As for the blank form working or not, there may be a way to FTP the blank form into the 3300. Again, not something that I have done, but I have seen it discussed here in this forum. Either that or set aside a few hours of deleting entries one by one.


**************************************
My Biggest problem is that I almost always believe what I tell myself.

 

[T8keiteasy]

I did...one per one :-(

Could not log via telnet !
Didn't loof for ftp solution (I would think this could corrupt database too).

Now, it's about French users too !!!