Delayed Ring Pattern

[geektechy]

For Definity 6400 series I have bridged appearances programmed and set as delayed ring, however after 3 or 4 rings they continue to blink...no audible rings.

I have per button ring control and bridged call alerting turned on.

What is the difference between abbreviated ring vs delayed ring?

 

[SF0751]

Abbreviated ring is a little "chirp" of a ring; not a full ring.

Susan
"When the gods wish to punish us, they answer our prayers." - Oscar Wilde, An Ideal husband, 1893

 

[geektechy]

is there a reason why on a delayed ring the bridged button does not ring? only continues to blink?

 

[SF0751]

Not sure, perhaps the call has gone to cover? Try tracing the call ("list trace stat XXXX").

Susan
"When the gods wish to punish us, they answer our prayers." - Oscar Wilde, An Ideal husband, 1893

 

[geektechy]

thanks Susan...I'll check it out.

 

[avayatek1961]

In the station programming for the ext that is the bridged appearence, you need to change the A/D to yes. This is next to the call appearences.

 

[f0netech]

On the station where the bridge-appearance buttons are programed, change the 'Active Station Ringing' field found on the 2nd page to 'continuous'