I have a G3r V6 trying to connect PRI / ISDN to legend software 5. I set DS1 to B8ZS, ESF, A, HOST. The legend is set for ATT custom, B8ZS, ESF and the last setting is only one and I dont know what it is. What is happening is I send digits down the T1 to it and it doesnt seem to reconize them. The D ch is up and from my T-berd I know the digits are being sent. The call is answered on the other side and we can talk. But the legend will not route call to the right station. Now on the other side legend will not send a call to the T1 to the definity. Any Ideas
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
definity to legend
- Thread starter mikeasa
- Start date
- Status
Similar threads
- Locked
- Question