Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

default IP gateway card

Status
Not open for further replies.

andyfram

IS-IT--Management
Oct 2, 2003
74
I have a TDA-0484 VoIP Gateway card (in a TDA600) and I don't know the IP address was previously assigned to the card.

Is there a way to default the card so I can get back into the programming interface?
 
They are closed for the next few days for the holidays.

 
do you have port scanner program ? you know what ports the
gateway works on? its worth a try.
 
I know how to on a tda100/200, I can only assume that the 600 is the same!
*Set the System Initialise Switch to the "SYSTEM INITIALIZE" position.
*CAUTION
Do not press the Reset Button nor turn the power off then on while the System Initialise
Switch is in this position. Doing so will initialise the PBX.
*Using the KX-TDA Maintenance Console, set the status of the card to OUS, then set it
back to INS.
*Return the System Initialise Switch to the "NORMAL" position.

This works for the TDA 30/100/200 Not sure for the 600 but I would try it anyway!!! (but that's me)
Hope this helps you
Terry
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top