DECT R4 Question 1

[rollfig]

Hello everyone, is it possible to have 2 master base in the same sytem in provisionning mode?
I already have 8 base with around 30 Ip dect 3725,
My customer will have another building across the street and i'm not sure that the base in building B will be able to see a Base in building A.
I have to put 8 other base station in building B.
Is there any other way to do it??
Thanks

 

[rollfig]

Forgot...IP500V2 Release 7.0(27) if neccessary..

 

[daveinwearside]

the simple answer is yes as long as the second master base is in a cluster more than 90dB away from the first master. (there will be no handover though)

ACSS SME
APSS SME

 

[tlpeter]

It will not be a dect master but a sync master.
So the actual basestation is a slave but set as sync master.


BAZINGA!

I'm not insane, my mother had me tested!

 

[daveinwearside]

there you go!

ACSS SME
APSS SME

 

[rollfig]

Ok Thanks guys i will try that!

 

[montyzummer]

Even better mobility licences or upgrade to R8 and get them free and £10 pay and go mobiles cheap as chips ....im now going to avoid a bullet from our sales manager!!

APSS (SME)
ACSS (SME)

 

[tlpeter]

That is not the same as dect!
But the free twinning is very useful indeed.


BAZINGA!

I'm not insane, my mother had me tested!

 

[vztech]

Yes ....put the one across the street in it's own sync region . Had to do this last week and it worked like a charm.

It's only dialtone!!!

 

[a4williams]

I'm trying to do this but my phones at the remote site can not receive incoming calls. Building #1 has one dect set as the master and in its own air such region. Building#2 has two dects. One is set as a slave and master for air synch. The second dect in building #2 is set as a slave and is also a slave in the air sync region. The phones can dial out just fine but can not recieve incoming calls from external or internal callers.